What is the best way to build a fire in a fireplace?
Many people become enthusiastic about building a fire in the fireplace just to find their best efforts literally. There is a science that effectively builds a fire, with regard to three categories of fuel. Tinder is the first part to be illuminated and then lights the rest of the fire. Therefore, the tinder must be highly flammable. Newsprint, wood chips, brown bags and dead pine are all excellent tinder. Newspapers can be rolled up and tied into nodes held by fire. The ignition includes branches and sticks of different thicknesses. The ties and branches can be as thin as the finger or a little stronger than the wrist. The ignition is illuminated by tinder and lights up the protocols.
The final category of fuel includes protocols. The best protocols to create a fire Sre Tardwoods such as Ash, Birch, Maple, Oak and Beech. Wood, which comes from fruit and walnut trees, is also good to burn and relax a pleasant smell of burning.
Soft wood, such as spruce or pine, is easier to illuminate and can be used for tinder and ignition, but should not be used as protocols. Softwoods contain a resin that forms a creature when burning. This creature remains flammable and can endanger the house if it is ignited.
protocols used to create a fire should be dry and ideally aged for 6 to 12 months. Green or freshly cut protocols tend to burn unevenly, smell bad and produce excessive smoke. If you want to find out if the wood is aging, check the small cracks along the cross -sections.
When you build a fire, remember that it also needs oxygen. Oxygen must be able to circulate burning pieces of fuel, which must be close enough to illuminate each other, but not crushed under one large protocol, stop oxygen in circulation.
The next time you build a fire, try it. Build a pyramid, starting with a layer of newspapers, all around and on top of the newspaperId a wooden tinder and then ignition. Make sure you draw pieces of wood so that the air can pass. Light the paper and place a few small divided protocols near the flames as soon as the ignition is ignited, but not directly on the upper part of the pyramid. When the fire goes well, add other protocols, but always leave at least one inch between them.