What is a truss beam?

In structural engineering is a lattice beam made of lattice. Truss is a network of bars that only experience tension or compression. This is made possible because the rods are connected by each other using only joints with pins that allow the rods to be rotated. A beam is a type of structural element designed to resist bending. The drop -down beam is a popular part of bridges because of its efficient use of materials.

The lattice beam can be considered a skeleton of straight bars that have a special type of connection. Each bar is connected to the joint of the pin that allows it to rotate in any direction. The effect of using only PIN joints is that each bar can only be in voltage or compression. They cannot be bent because the bending bar simply relaxes if the end can turn. When connected to the triangles, these sticks form a rigid truss structure that acts as a solid piece.

The advantage of the lattice nose is the ratio of its strength to weight. Usually, greateron the space inside the lattice beam is empty; The structure is the skeleton of the bars. The relatively high tideline strength can be maintained because the rods are only exposed to voltage or compression voltage.

The beam is used specifically to withstand the bending of deformations into a circular arc shape. The inner perimeter of the bend is compressed to less than the length of the beam. On the other hand, the outer circuit is stretched to a larger size than the original beam length. Both of these deformations are used to withstand the bending of the applied. If it is not permanently damaged, the beam will tend to return to its "natural" state.

The rug beam can be used in the same way as a solid beam. If the trussed beam is built with the same external dimensions as the beam, it could be subjected to the same bending load. A truss beam that would consist of a triangles of bar with joints nAnd their ends would resemble the same circular arc shape as a solid beam. Here, the bars near the inner perimeter would also be compressed. Combined with tension of sticks near the outer perimeter, the lattice beam would be able to withstand bending.

engineers could decide to use a lattice beam in Most because it is more economical and easier to design than other patterns. As with all truss beams, the lattice beam is a very effective way to use materials. The cost of raw materials, production and transport can be much lower with a lattice beam than with a solid beam. It may also be more feasible to build certain structures such as bridges, with lattice rays.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?