What is a sloping drawing?

A sloping drawing is a simple form of three -dimensional (3D) drawing, which is often created for design or engineering. Such a drawing usually consists of an object in which the front part of the building is drawn flat, with a height and width of the object drawn correct length. The object is then administered by depth on the sides drawn at an angle to create a feeling of three -dimensional object; This is often at an angle of 45 ° and the hips can be tented. A fragile drawing will usually be one of three types: normal, wardrobe or cavalier.

To create a sloping drawing, engineer or designer, he usually starts with a "three -phase drawing". This consists of a single object depicted in three different views: front, side and upper part. The front drawing is usually created first to determine the height and width of the object. The vertical lines of the front view can then be extended up on the paper, adding the depth of the object and this Creates upper view. The horizontal lines from the front point of view can then be extended to the side of theEarth's view, the right depth is used again and therefore a side view is created.

with a three -view drawing can easily create a sloping drawing. This is done by means of height and width from the front point of view and maintaining the same size. The depth of the upper and side view can then be used to add the depth of the sloping drawing and create a 3D feeling in the picture. While any angle could be selected to create in -depth lines, an angle of 45 ° is often selected for an easy visible nature of the lines at this angle.

The length of the line used to add the depth of the object determines the type of created sloping drawing. Normal oblique drawings use deep lines that are only three -quarters along the length of the depth determined by the three -piece drag. Cabinet drawings use lines only half the length of the original depth lines to create an oblique object.

In one of these types the object appears ZDCunned and will seem closer to how it can actually appear in 3D space. On the other hand, the oblique drawing of the cavalier uses deep lines that are the same as the upper and side views in the drawing with three views. Although it retains the sizes in the picture of three views, the perspective created by this type of oblique is much more exaggerated.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?