What is the span of the beam?
Rays
are an important structural device used to support buildings, bridges and decks. The beam span is the maximum length that allows the beam to adequately support a specific weighted area. This range is different for each type of beam material and is based on the beam dimensions. Stronger rays can have a longer range than thinner rays. Building inspectors use these graphs to determine minimal load requirements for beams. The beam span should not be overloaded, as this could cause a dangerous condition in the structure of the building.
The beam range is different for each type of material. The stolen beam is heavier than a wooden beam and can support a larger surface area. These rays are usually used to support houses and bridges, but have a limited range of weight -based structures.
i-lap is beam in the form of H, which is used to support the main floor of the house or building. This type of beam is usually made of steel and has a specific lengthU and width based on the size of the house. The beam range for I-Pansy varies depending on the width, height and thickness of the steel beam.
on -board rays are rays that hold floorboards for deck. The beam span for most on -board beams is less than 16 feet (4.87 meters), but may be up to 8 feet (4.87 meters) depending on the thickness of the beam. These special rays support the weight of the main floor on board necessary for the overall structural integrity.
Therange of beam, which is harder than necessary, can be expensive for homeowners or builders. It is important to review the relevant requirements for each construction application. This ensures that the structure is safe without being unnecessarily costly.
Bridge beams are special bridges made of wood or steel beams. When the rays are more distant, the bridge structure weakens. This is the reason whyMost of the beam bridges are made of multiple beam units that are connected to form a continuous bridging bridge.
The span of the concrete beam is usually used on national highways and bridges. These concrete structures are supported by large multi -lane roads. The concrete beam is an example of a concrete bridge that has a specific span for each arm. These special rays can support a range of more than 150 feet (45.72 meters) long.