What is an automatic document feeder?
The automatic document feeder is a device that feeds multiple sheets of paper for automatic time than manual operation in a bed of copier, scanner or fax machine. The capacity of the feeder may vary and can handle both sides of each document, not only on one side. Many manufacturers of scanners, copiers, All-in-One devices, fax machines, etc. stop the automatic document feeder into their design or sell an attachment for users who want to add one later. This can be time consuming and can generate mistakes. For example, a fax machine could end the connection if the user is too slow and cannot feed another page in time. Especially if the operator needs copies of both sides, not only one, the hand document can be time -consuming and susceptible to errors. Some machines use the technology of conversion to pull data from one side and then the other andOthers work in duplexing mode for scanning both sides. The automatic document feeder has manuals to keep the paper in place while the machine processes the task, and it can be adjusted to suit different paper sizes.
Installing the automatic document feeder adds volume and can be top or opening much heavier than other models. It is important that the user is careful with a document feeder, which is mounted on the top of the rotation, such as the species used on many copies and scanners. If the operator does not manage the peak carefully, the document feeder can kill the table or walls and may not work properly if the impact of something breaks.
errors can occur with the automatic document feeder. Very thin paper leaves could stick together and thick paper can be too bulky to make the device. Textured paper or paper that has edges can also be stuckUT. At best, this could cause a problem with work, but it could also destroy the original. If paper is fragile, strangely large, very strong or very thin, it may be a better idea to be fed by hand.