What Is an IR Transceiver?
Infrared receiver is a device that can receive infrared signals and can independently receive and output from the infrared compatible with TTL level signals. Its size is similar to that of ordinary plastic-sealed triodes, which is suitable for various infrared remote control and infrared data transmission.
Infrared receiver
Right!
- Chinese name
- Infrared receiver
- Foreign name
- no
- Volume
- It's almost the same as the ordinary plastic transistor
- Features
- Compact design with dedicated IC
- Infrared receiver is a device that can receive infrared signals and can independently receive and output from the infrared compatible with TTL level signals. Its size is similar to that of ordinary plastic-sealed triodes, which is suitable for various infrared remote control and infrared data transmission.
- Small design
- Built-in dedicated IC
- Wide angle and long distance reception
- Strong anti-interference ability
- Able to withstand environmental interference fiber
- Low voltage operation
- Structure of the infrared receiver
- There are only three external pins: Out, GND, and Vcc. Very easy to interface with microcontroller
- 1. The pulse signal output terminal is directly connected to the IO port of the microcontroller
- 2. GND is connected to the ground line of the system (0V)
- 3. Vcc is connected to the positive electrode of the system (+ 5V)
- 1. Store and use in an environment without any external pressure and quality.
- 2. Store and use in the environment without pollution gas or sea wind (salinity)
- 3.Storage and use in low temperature environment
- 4. Solder the lead pins under specified conditions. Do not apply external force after welding.
- 5. Do not clean this product. Before use, please use static tape to connect the operator and the ground wire.
- 6. Pay attention to the receiving surface of the infrared receiver. Contamination or abrasion will affect the receiving effect, and do not touch the surface. [1]