What is a fire suppression system?

The purpose of the fire suppression system is to either burn the fire or stop it in dissemination. These systems are often used together with fire alarms and smoke or heat detectors to protect people and physical structures. Three main categories of fire suppression system use water, inert gases or various chemical agents to suppress fire. These systems can also be automatic or manual, depending on whether they require external intervention to activate. Some fire suppression systems may be dangerous to anyone in the general vicinity, including the risk of asphyxiation associated with the drawing of inert gases into the area to starve the fire of oxygen. This type of fire suppression system can be wet or dry. The wet spray system is constantly charged, which means that there is always water in the pipes. This type of fire suppression system can be automatic, and AA is activated if the system sees smoke or excessively high temperature. Dry sprinklers are manual systems that can only be activated after the water source isattached to the pipe.

Another method of fire suppression involves filling in inert gas. Because the fires require oxygen burning, it may have a spiritual effect. These fire suppression systems are commonly used in sensitive areas where water could potentially damage objects such as computer equipment or documents. The humble server rooms are one of the areas where inert gas, such as Argon, is often used to suppress fires.

Inert gas can suppress fire without damage to electronics or other equipment, but may also represent other health and safety risks. In some cases, the inert system of gas fire suppression may lead to stuck. Most of these systems are equipped with alarms to warn the staff to leave the area before TLPLYN is released. Another potential problem with these systems is pressure because sudden introduction of previously compressed gasIt can potentially throw windows or walls into a small space.

both wet and dry chemicals can also be used in fire suppression systems. These systems are usually automatic, although they may also have manual controls to activate the release of fire -suppressing chemicals. Some materials may respond poorly to the presence of water or inert gases, in which case the safest option is a dry or wet chemical system of fire suppression. Since these chemicals can be dangerous to human health, a delay is often built to escape everyone in the area.