What is the flange adapter?
Flange adapters are an extensive family of accessories for flange, which allow joints to be performed between different types of flange or flange and non -swimming devices. Significant flexibility gained by the use of these devices will be reflected when a huge range of common types of flange is considered. In fact, most flange manufacturers or flange manufacturers produce their own range of accessories for the hand -made adapter, which makes it easy to integrate their products into other systems. Although these adapters are represented by a huge number of different types, they fall into two main categories. The first are types of flange on the flange, the second is those used for flange and invalid devices. The flange disc is equipped with a series of holes around its periphery through which the locking screws pass. Connect to two similarly cut pieces of equipment, two halves connect, lock screws pass through holes in flange discs and tensioning. This pulls two flanges hard against each other and ÚThey actively connect to two pieces of equipment.
The flange adapter is used where these two pieces of devices do not have similar types of flange or the flange is only half. These adapters fall into two wide categories, namely those used in different pairs of flanges and those used in situations where a non -swimming part is connected to the flange. Floor flange adapters are usually represented by those adapters designed for different flanges and those used to flanges the same size with different layout arrangements.
The flange of different sizes can be easily made using an adapter of a flange with one of the two sizes of a flange connected by a short reducing section. These adapters are simply arranged, so the size of the flange is connected between parts and adapter and tension in a normal way. Adapters used to connect flanges to differentThe holes patterns are even simpler and usually consist of a single disc in half on both sides with two different holes. The holes in the adapter are tapped with a standard screw threads, so when slipping between two different flanges, the screws can be used to tighten each of them against the adapter. In general, this type of adapter will be supplied by a set of correct screws.
flanges on Neflanged joints require a special type of adapter of a flange that generally has a flange at one end and a secondary blocking mechanism suitable for the respective equipment on the other side. For example, the flange adapter designed to connect to the non -silent hose into the pipe -equipped flange on the second. The flange end is screwed to the flange of the secondary device in a normal way and the uncorrect hose securely connected to the hose clamp.