What is the lead?
The pipe is simply a pipe through which things can be handed over. In the production and industry, this term is most often used to indicate the pipes used in the cabling. This type of pipeline is used to protect, insulation and insulation of wiring, such as cables, electrical wiring, etc. There are a number of different types and in some settings the building code may require the use of a specific style of management for health and safety reasons.
The beginnings of the use of the lines lie in the first days of electrification. When people ordered their homes electrification, electricians commonly used pipes that were used to transport gas to operate electrical wires in a way that would be inconspicuous and handy and relied on existing systems to operate the network rather than cutting the holes to set the new system. Over time, electricians realized that in addition to being advantageous, the pipes actually served several important functions and the pipes began to be installed with the new Electrical Systems.
One of the advantages of a cross -country wire over the pipeline is that it is protected from elements. When the cabling leads outside, through a parking garage, laboratories or other areas where it could be exposed to water, chemical pairs, etc., it can trigger it inside the pipeline to protect the wire from degradation. This means that it will not have to be replaced as often as exposed cabling and reduce the risk of electric shorts that could lead to fires, equipment failure and other problems.
The use of cabling and electrical cabling also insulates from the impact. If the cabling is placed in the area with high operation, near the elevator, or so on, the pipeline may be protected to prevent any impact or stress from preventing the pipe. This can also be important when engaging in the area of stress exposed.
Prigid and flexible styles are Available. Solid pipes can offer greater protection, but it is harder to work with it, PRIt must be either bent or connected because it is brought by a structure. Flexible versions are easy to install, but can provide less protection of closed cabling, although instead of stressing or bending, they provide instead of stress, which can be useful. Metal and non -metallic options can be found in many hardware stores and shops provided by electricians. It is good to carefully read the construction code to check any limitations and requirements to confirm that the right materials are used before starting the project.