What is the beam?

In construction and reconstruction projects, it is sometimes necessary to strengthen or strengthen the beam that will have a weight. There are several methods to achieve this, and few of them are more versatile and efficient than the use of beam. The sewn beam consists of two wooden beams connected together with a steel plate-Zzzzzzzdch pátička-on strengthening and multiplying the strength of the singular beam. While the use of lusts is largely replaced by composite lumors, which are equally strong, but cheaper and easier installation, the beam is still a lot and is a common technique, especially in renovation projects.

In situations that call the beam that can transmit loads to longer distances can be particularly useful. The construction of the roof would be an example of such a situation. A seal beam can carry much heavier loads than a simple wooden beam, so it's a good choice for such applications. It is also lighter than a steel beam that adds convenience to it in home projects. PThe beam is made of wood, unlike metal, the plush beam can still be connected to existing wooden structures by means of screws or screws with less effort than it would be in the case of steel beam.

To form a beam, two rays must be cut off to length. Then a prefabricated sence plate is inserted between the two rays. Finally, three parts of the composite beam are screwed together that can be done outside or on site, depending on the size of the project and the availability of resources. One of the disadvantage of the sewn beam is that the board must often be prefabricated; If this is not the case, it may be something like a chore to be installed on the spot, even if it is by no means impossible. Some experts have moved away from cracking rays due to high costs of work associated with their installation and instead decided to engineering composite timber studs and rays to achievethe same goal.

Slitch beam is also a versatile method, as the power of the beam can be increased by adding more plates and wooden rays. The more boards and beams are added, the stronger the beam. Again, it is particularly useful in renovation scenarios, where the existing structure must be reinforced. Furthermore, because this type of beam is stronger than a normal beam, the movement beam requires less depth than a normal beam.