What is Saber?

Old versions of SaW Saw - also spell -spent SAW - were not newocoted hand saws that consisted of a thin blade with a handle at one end. Today, however, this term usually applies to a handkerchief with a blade that moves adjustable speeds. Some people refer to Saber Saws as jigsaws or reciprocation saws , although these saws can also come in stationary form. The saber saw is primarily used to cut curves at different angles in the wood, but with the right blade and guide can be used for different purposes. All Saber Saw models have an engine cover, a blade switch and assembly, with some newer models offering speed variables. Cable models have a power cord, but newer, wireless models have abtentions. Although the Early Power models contained the upper handle or the barrel handle, the D -shaped handle has also been introduced.Oti the material he cuts. The first models were blades with a standard motion of reciproce, while there is also a "orbital" version, which allows Blade to move forward and back and down and down.

Said saw cutting may require different settings depending on the type of cut. The curves are often cut by simply fixing the wood in the place and moving the saw to follow the line that was drawn on the wood. However, a circle can be used for perfect circles. The “normal” setting of the saw is 90 degrees, but the Saber SAW angle can be adjusted to 45 to 90 degrees to reduce the chamfer and cut the room line for the Th. For direct cut, a guide fence can be used - a direct piece of wood used to keep the saw in a straight line - and some people use two fences, one on each side of the saw.

The blade series allows the saw to use Saber in different ways and on different materiáals. When it was first introduced, Saber Saw was advertised as a replacement for a series of other saws, including saws and cross saws, and - due to the appropriate blade, it is able to perform both tears, parallel to a wooden grain and cross at the right angle to the grain. In addition, there are fine cutting and coarse cutting blades that are distinguished by smaller and larger tooth size and special blades for metal cutting. The resistant blades are made for cutting veneer and laminated wood.

In order to safely use the saber saw, generally recommended goggles are recommended. Before each use with a cable model, the power cord should be checked for fraying and the user should make sure that the power switch is in the "OFF" position before connecting the saw. The appropriate blade should be selected for all saws on the saber and sharpness is checked. When the saw is gone, the blade can be removed and inserted in a case for safer storage.