What is the sand separator?

The sand separator is a device used to remove sand or mud from liquid suspensions, usually water pumped from growl and well. Most sand separation equipment works by passing the cyclonic flow formula in the water passing through them. This action turns heavier sand particles towards the outside of the separator, where it settles in the collection chambers for later removal. This distinguishes sand separator from conventional filters and is also more reliable and easier to maintain. These devices fall into two basic categories: equipment located above the ground and equipment located in the well. This suspended mud is not only undesirable from a health point of view, but also plays confusion with pump parts, valves, pipes and irrigation systems. Removing the suspended sand from the well can be achieved by using physical filters or by placing the sand separator until the pipes or suction pump pipes. Filters are very effective in removing suspended sand from water, but are also susceptible to clogging and require considerable ÚSilters for cleaning and maintenance. In addition, the elements used as physical barriers in the filter are often very expensive.

The sand separator is the possibility of removing sand much easier in operation and requires less maintenance and financial commitment to maintain. These devices use a rotary cyclone event within their packaging to give the centrifugal power to the water passing through them. Most of the sand separator units are closed, cylindrical equipment and achieves cyclonic action by stretching the water into the cylinder through the entrance ports located on the tangent to their linear axis. This causes the water to rotate in a spiral pattern as it passes through the device.

The

centrifugal force contributes to a more suspensive part of the tube where it settles and is collected. Clean water is then pulled out of the cylinder and into the drain pipe. As the sand removed is removed from the separator, it depends on which of the two basic types of devices is used. The first ofThese are above -ground separator, which is generally easily accessible. This type of device is equipped with a flushing valve at the bottom of the cylinder, which allows manual sand from the device at regular intervals manually.

The second type of sand separator is the device in contradiction or submerged device located at the bottom of the well or well, which is obviously not accessible. These separators have an automatic, flexible valve at the bottom of the separator. When a predetermined amount of sand was collected at the bottom of the cylinder, the valve opens automatically and the sand falls into the bottom of the well.