What Is a Turret Milling Machine?
Vertical turret milling machine is also called rocker milling machine, universal milling machine, is a type of turret milling machine, belongs to the category of milling machines. The difference between a vertical turret milling machine and a turret milling machine is that its main shaft can only feed vertically. The main axis travels at a 90 ° angle to the table plane, so it is called a vertical turret milling machine.
Vertical turret milling machine
- Chinese name
- Vertical turret milling machine
- working desk size
- 1370 x 360mm
- Left and right stroke
- 900mm
- Forward and backward stroke
- 300mm
- Vertical turret milling machine is also called rocker milling machine, universal milling machine, is a type of turret milling machine, belongs to the category of milling machines. The difference between a vertical turret milling machine and a turret milling machine is that its main shaft can only feed vertically. The main axis travels at a 90 ° angle with the plane of the table, so it is called a vertical turret milling machine.
- The vertical turret milling machine can be widely used for machining planes, inclined surfaces of any angle, milling of key grooves, grooves, and can also be turned, hinged, and boring. The milling head can be rotated 90 degrees left and right, 45 degrees forward and backward. Pan 360 degrees. Large spindle speed range and high speed. The spindle sleeve can be fed by motor with fixed range and equipped with overload protection device. The spindle sleeve, the machine tool guide, and the workbench are hardened with high frequency, which is beautiful and practical. The vertical turret milling machine can be optionally equipped with a motorized feed device and a digital display system.
- Front and rear slideways and high frequency hardening treatment, precision grinding.
- The surface of the spindle tube is hardened with high frequency hardening and precision grinding.
- Lift slide is hardened and precision ground.
- Y and Z axes are square slideways.
- X-axis is dovetail slide.
- The whole bed is cast, with strong rigidity and long life.
- Table size: 1370 x 360mm
- Left and right stroke: 900mm
- Front and rear stroke: 300mm
- Up and down stroke: 380mm
- Spindle motor: 4HP
- Spindle taper: NST40
- Spindle diameter: 105mm
- Spindle speed: (vertical) 80-5440rpm (16 speed)
- Tilt angle of end mill: 90 ° left-90 ° right
- T-slot: 16mm x 3 x 65mm
- Outrigger stroke: 600mm
- Machine weight: 1700kg
- 1. Cleaning: Disassemble and clean the various oil scraping skins; wipe the sliding surfaces and guide surfaces, wipe the worktable and horizontal, lifting screw, wiper and knife holder.
- 2. Lubrication: Keep each oil hole clean and filled with 32 # lubricating oil; fill lubricating oil on each rail surface, sliding surface and each screw; check the oil pot, oil surface, and add oil to the elevation position.
- 3. Tighten: Check and tighten the pressure plate and insert screws; check and tighten the workbench stop screws, cutter drive mechanism, three-ball handle, and workbench support screws.
- 4. Adjustment: Check and adjust the tightness of the milling head belt, pressure plate and inserts. Check and adjust the limit stop and screw clearance.
- 5. Anti-corrosion: remove the rust and protect the painted surface from collision; stop, the guide rail surface of the standby equipment, the sliding screw handwheel and other exposed rusty parts are oiled for anti-corrosion.