What is a wooden thread?

A wooden thread is a device or a combination of a device that can be used to create wooden screws and sub -spare holes. These devices can be either semi -automated or completely manual nature. Semi -automated wooden threads usually use the router to cut male threads into the dowel and click the female fibers. Manual versions are basically kits and matrices that are designed specifically for wood. Each wooden thread can only cut the thread of a certain pitch and diameter, so the kit, which contains more threads, is essential for working with different size of the dowels. In the knock and die, the tap is a component that cuts women's thread and the matrix is ​​used to create male threads. Because the fibers must be cut into a cylindrical object, wooden dowels are usually used for this purpose. In order to use this type of wooden thread, the dowel is usually inserted into a crime or preparation to stay in place while the fibers will be cut. After she canT is located at one end of the dowel and can be placed on one end of the dowel and new fibers are cut when rotated.

More complex, semi -automated wooden threads perform the same basic function using the router table. A special router bit and the product can allow the operator to cut accurate fibers into the dowel when it is passed over the edge. Since this type of wooden thread results in the rotation of the dowel exactly in relation to how far it has exceeded the bit, the operator can usually feed it as quickly as the router is able to cut. This type of wooden thread can result in a more accurate fiber, as there is less space for an operator error during the procedure.

Both types of wooden threads usually use taps to create female threads. This type of wooden tap can be used either wooden nuts or trim the thread in a larger piece of wood. One of the currentThe use is to create knocked holes on the underside of the table in which the legs are chased. This is first achieved by drilling the hole and then slowing down slowly. The sharp edges of the tap are designed to cut accurate thread, into which the threaded dowel can then be screwed.