What Is an Aerial Work Platform?

Aerial work platform (Aerial work platform) is a product that serves various mobile aerial work such as aerial work, equipment installation and maintenance in various industries.

Aerial work platform

Aerial work platform (Aerial work platform) is serving various industries

The following are optional devices: hydraulic generator, hydraulic welding machine, hydraulic air compressor, hydraulic high-pressure water pump, hydraulic oil radiator, AC power supply connected to the platform, swing bridge, platform weight limit function, platform work light, 4 * 4 drive, foam tire 12 * 16.5.

With the development of social science and technology, the use of aluminum alloy elevators is becoming more and more widespread. Whether it is construction, civil engineering, or people's daily life, hydraulic elevators are inseparable. Many businesses have seized this opportunity to invest in factories and lift machinery companies. After that, it stood like bamboo shoots in various industrial cities, but the lifting machinery industry was still hot and in short supply. From the side, we can see that the rapid social development now drives the development of the entire industry and people's needs. However, as a purchase How to choose a good lifting machine for the company's products has become an important topic today.

One: When choosing lifting machinery, you cannot choose blindly. You must do a good job of market research and field inspections to determine the size of the company and its credibility. This is first and foremost. Now many small-scale enterprises in the market are cutting corners in order to seek violence, which greatly reduces the quality of lifting products. Although they will be sold very cheaply, this mechanical time is not long and the risk factor is Big. Therefore, as a buyer, you cannot covet a little price and make it a bigger regret.

Two: Based on the information you have surveyed, choose a good cost-effective lifting machine, and choose from its technical parameters and practicality and versatility. There are usually many types of aluminum alloy lifting machines, including (car-mounted elevators,

The hydraulic oil is formed with a certain pressure by a vane pump, and enters the lower end of the hydraulic cylinder through an oil filter, an explosion-proof electromagnetic directional valve, a throttle valve, a hydraulic control check valve, and a balance valve, so that the piston of the hydraulic cylinder moves upward and lifts the weight. The return oil from the upper end of the cylinder is returned to the fuel tank through the explosion-proof electromagnetic directional valve, and its rated pressure is adjusted by the relief valve, and the pressure gauge reading value is observed through the pressure gauge.

The piston of the cylinder moves downwards (both the weight is lowered). The hydraulic oil enters the upper end of the hydraulic cylinder through an explosion-proof electromagnetic directional valve, and the return oil at the lower end of the hydraulic cylinder returns to the tank through a balance valve, a hydraulic control check valve, a throttle valve, and an explosion-proof electromagnetic directional valve. In order to make the heavy object fall smoothly and the brake is safe and reliable, a balance valve is installed on the oil return road to balance the circuit and maintain the pressure so that the descending speed is not changed by the heavy object. The flow is adjusted by the throttle valve to control the lifting speed. In order to make the brake safe and reliable and prevent accidents, a hydraulically controlled one-way valve, that is, a hydraulic lock is added to ensure that the hydraulic pipeline can be safely self-locked when the hydraulic pipeline accidentally bursts. An overload sound alarm is installed to distinguish overload or equipment failure.

1. Must be equipped with professional operators who have undergone special training, passed the examination, and hold a post.

2. The operator must start the lifting platform after performing various inspections and maintenance in accordance with the maintenance regulations of machinery and equipment. Before working, check the working range of the platform vehicle and remove obstacles that prevent the platform vehicle from turning and walking.

3. Support is an important preparation for the operation of aerial work platforms. The flat ground should be selected. If the foundation is soft or uneven, it must be solidified with sleepers before it can be used for work.

4. Generally, the aerial work platform should raise the lower arm first, then the middle arm, and finally the upper arm. During the slewing operation of the lifting platform, the slewing must be performed after the lower arm is lifted to a certain height. The slewing should be slow. At the same time, pay attention to whether the distance between the shear arm and the platform to the equipment meets the safety requirements.

5. Operators on the working platform should wear safety belts. When working in a live area, the car body should be grounded according to regulations. The person in charge of lifting the platform should be instructed by the person in charge of the work. Platform operators contact. The signal must be clear and accurate.

6. Before the platform operation, the person in charge of the work should provide technical and safety explanations to the operator. The content should include: work content and requirements; safety precautions and danger points; division of labor and scope of responsibility. In addition to checking the condition of the vehicle and the operator, the person in charge of the job is also responsible for checking whether the terrain environment, landing and landing meet the requirements

1. Any work performed at a height of 2 meters and above shall be regarded as a high-altitude operation. Everything that can be done in advance on the ground must be done on the ground to minimize work at height.

2. Persons working at heights must be in good health. People with mental illness, epilepsy, and high blood pressure and heart disease identified by physicians are not allowed to participate in work at heights. It is forbidden to ascend to the staff when it is found that the staff member is drinking alcohol or is in a state of weakness.

3. Scaffolding or measures to prevent the team from falling must be performed before working at heights.

4. Work on dam tops, steep slopes, roofs, cliffs, towers, suspension bridges, and other dangerous edges. Safety nets or protective railings should be installed on the side of the air, otherwise staff must use

Aerial work platform helmet

1. Before using the helmet, check whether the shell, cap lining and strap are complete and effective.

2. Adjust the helmet lining before using the helmet so that each part of the helmet lining is spaced from the shell.

3. The cap hoop should be adjusted according to the shape of the head to prevent the hat from sliding and blocking the line of sight when lowering the head.

4. It is strictly forbidden to lining the two top layers of the helmet into one layer.

5. The helmet should be worn tightly and properly, and the hood strap should be tied under the jaw and fastened.

6. The validity period of the helmet is calculated from the date when the product is manufactured. The plastic cap does not exceed two and a half years, and the glass steel cap does not exceed three and a half years.

Aerial work platform seat belt

1. Seat belts can only be used after being tested by the inspection unit every six months.

2. When working in the following conditions, you should wear a seat belt:

(1) It is possible to perform high-altitude work. When entering the workplace, you must wear a seat belt;

(2) When working at heights above two meters;

(3) Work on scaffolds without scaffolds or bars, when the height exceeds 1.5 meters;

(4) When working on inclined roofs;

(5) Flat roof, when there is no protective fence within 1.2 meters from the roof edge or roof opening;

(6) Any suspended platform or workbench;

(7) any guardrail, scaffolding with incomplete planking;

(8) Close to the ladder near the roof or ground opening;

(9) When there are no reliable fall prevention measures for working at high places.

3. How to use seat belts correctly:

(1) To tighten the belt, the buckle assembly must be fastened and straightened;

(2) When using a seatbelt for suspension operations, do not hook the hook directly to the seatbelt rope. Instead, hook it to the hanging ring of the seatbelt rope;

(3) It is forbidden to hang the seat belt on a weak or sharp-angled component;

(4) Using the same type of safety belt, all parts cannot be replaced without authorization;

(5) The seat belt under severe impact cannot be used even if its appearance has not changed;

(6) It is strictly forbidden to use safety belts to transfer heavy objects;

(7) The safety belt should be hung on a firm and reliable place at a height not lower than the waist.

Aerial work platform safety rope

1. In order to ensure that the high-altitude operators always have safety guarantees during the movement, when performing particularly dangerous operations, it is required to fasten the safety belts and hang them on safety ropes.

2. It is forbidden to use hemp rope as safety rope.

3. Use buffers longer than 3 meters.

4. Two people cannot use one safety rope at the same time.