What is the mill?

edge mill or chilian mill is a cut device used to crush or mills red and grain. The mill uses a few round stones or weights located on their edges that revolve around the central pivot in a shallow round milling bed. The grain or ore is poured into the milling bed, where they are crushed by the edges of the rotating stones. Early examples of the mill on the edge were powered by animals, wind or water, with later energy sources, including steam and internal internal combustion engines or electric motors. At the beginning of the middle of the 20th century, the milling mill was also often used in the production of explosives such as black powder. Round stones are rolled over the spread of grains to a flat surface that proved to be one of the most effective milling methods, while stone mills were still in everyday use in many global regions. Edge Mill was one of the more efficient types of stone mills. The mills consist of a driven vertical shaft that passes at right angles. OnThe axle is mounted a few large round stones or weights with holes in their centers, which is slightly closer to the central shaft than the second.

When the drive shaft turned, the stones rolled around their axis at the edges in a round flat milling bed. The milling bed was usually equipped with a low edge that created a shallow pan to stop the spilling of the milling material. Different types of ore and grain were poured into the milling bed, where rotating stones crushed them between their edges and the surface of the bed. The fact that one round was located closer to the central shaft than the other meant that the traces of stone overlap and cover the wider area in this process. Different edge textures and adjustable stone heights gave the mill operators a certain degree of control over how gently the material was a mill mill.

various energy sources have been used to control a marginal mill for ages for ages. Early mills were movingOxis, donkey or horses, with later types driven by wind or water wheels. As the technology proceeded, the marginal mill was usually powered by electric engines and steam, gasoline or diesel engines. In addition to grinding ore and grain, these mills were widely used in the production of chemicals and explosive ingredients. Many plants that produce high quality black powder for blasting of explosives and ammunition production used the mill for powder components before mixing.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?