What is an electric pipe?
Electrical pipes is a global term to describe any closed pipe, channel or pipes used for tracing or protection of electrical wiring. The line can be round, square or oval in a cross -section and can have one piece of construction or removable covers or lids. The commonly used pipe materials include mild steel, aluminum and PVC plastic and each with its own specific methods of joining individual sections. Electric pipes can be mounted on walls and ceiling beams or may be buried underground or built into the walls. Most management systems also contain a selection of auxiliary fittings such as inspection boxes, bends and intersections that help in their installation and maintenance. The electric wiring system protects the cabling and creates a complex routing board. These systems consist of enclosed pipes, suitcases or pipes that prevent connecting, broken, crushed or cut throughout, consumed rodents or Ultrafia degradeslined with an exposure. Most pipe systems consist of round cut pipes, although the square pipe is also relatively common, especially in terms of large volumes of wiring. Square is usually open on one side with a removable lid that facilitates access to cabling.
Although most modern electric pipes are made of fine steel, aluminum or PVC plastic, many older systems still have tubes made of fiber impregnated cellulose and fired clay. Perhaps the best example of them is the bitumenized Orangeburg pipe still very evidence in many older homes. These old pipes are generally oval in a cross -section with adhesive and sealing joints. Although these pipes are usable, they are generally less resistant than modern systems and often fail due to fragility and complex. Burned clay is also a dated system; This variant is not as common as the orangeburg pipe, but soé very fragile and susceptible to damage.
Most electric wiring systems have large selections of associated fittings, which makes installation and maintenance of a relative breeze. These include a number of bends, inspection boxes, connecting boxes, joints, light fittings and sockets. Many types of pipes, including steel and PVC pipes, can also be bent on site to meet the requirements for routing or obstacle. Runs of line can be mounted on the wall surface, through the ceiling beams or inside the wall cavity. In some cases, the pipeline may also be buried underground or built into the chased grooves in the brick walls, which are usually plastered after a safe guidance.