What is the director's conveyor?

The medium conveyor is an increased system similar to the transport belt at the floor level, which is used to transport objects throughout the equipment. Unlike the transport belt, which is controlled by the belt, the upper conveyor is driven by a chain and is significantly thinner. Carts - units that hold objects - are generally rings or hooks and each can hold a considerable amount of weight. This conveyor can be used in many types of equipment, but is particularly useful for those that require bends in the conveyor. Such a conveyor uses space well, but it may not be good for equipment with heavy loads. The chain conveyor uses instead of using the belt. The use of the chain is the railway sheets of the upper conveyor or song much thinner. The string is less likely than the belt that has worn, which usually leads to lower operating costs.

Many types of trucks were made for upper transport systems, but the basic trolleys are rings and hooks. The hangers and the basket units are quite common, but are generally for Specialized purposes. This makes the upper conveyor a universal system that can be converted to hold almost any item. Most trolleys can hold from £ 10 to £ 100 (4.5 to 45 kilograms), but specialized trolleys can hold much more.

Increased traffic rails can be easily curved, so this conveyor is usually used in devices that require a lot of twisting and rotating before the item reaches the target. This is because the rail can be distorted to any angle during the production process. The string can be easily driven by curved rails, while the belt would require a significantly more work to curvature.

Another advantage of using a directional wheelchair is that efficient use of space. And the Belt is attached to the ground, so nothing else can be placed there. With the top conveyor, the conveyor in some areas can be high enough to make workers walk under the DOPRavník. Although it is impossible because of the height of the ceiling of the device, it still leaves space on the floor for other hardware and machines that may not otherwise have to be useful. The disadvantage of this conveyor is that even if it can maintain considerable weight, the conveyor belts can usually hold more; Handling very heavy objects of the device may not be able to use a directorial conveyor.