What is the crushed reinforcement?
Cross reinforcement is a design technique in which braces are crossed to form x to support frame. Cross braces are often metal, but can also be made of wood. Cross reinforcement is used on many different types of objects, including ship frames, furniture, walls and floors. Virtually any type of frame can be strengthened with a cross orthosis - even building frames. After all, the frame is mostly a hollow space. The frames can be as simple as four strips of wood connected at each end as a picture frame or as complex as scaffolding made of metal pipes in many different directions. The scaffolding is large framed structures such as structures used to raise painters and subsoil windows. The larger the frame, the less robust it will probably be without any support braces added.
The metal is robust, yet because there are such long lengths in larger scaffolds, there may be an unstable frame that is circling too easily. If there is between two of the pFrame Ruhu connected another metal piece, less twist. Yet for the most demanding solution, a second piece of metal is required and crossed for creating x. This effect of the short -circuit reinforcement strengthens any type of frame when the braces are added to sufficient places in the frame. Because cross -X patterns are diagonals in the shape, these braces are known as the diagonal type of strut.
6 Back of books of books and entertainment units are usually crossed to give them strength to hold heavy loads. Cross braces at the bottom of chairs or tables keep the seats and table tops before fluctuations.In the installations of floors, crosses are made between floor beams to avoid moving. Even large structures such as ships and buildings require structural reinforcement achieved by cross reinforcement. The ships are crossed to help them stand on the heavy winds. The buildings are crossed to help them demonstrate them in the case of an earthquake.
Cross strut technique used as part of buildingsResistant to disasters can only be done if the foundation is sufficiently strong. Cross reinforcement cannot replace the lack of structural integrity of the building. If the building can be crossed, one of the most effective methods is to create x struts right from the top of the walls down to the floor.