What are the different parts of the kitchen robot?

Parts of the kitchen robot include eyelids, bowls, pushing and blades. The coat of the robot is a small electrical kitchen appliance responsible for shredding, chopping, slicing, kneading and grid. Although, like a blender, kitchen processors work better with food than liquids due to their round design in the shape of a bowl.

lids are required for kitchen processors, so the spinning blades do not hurt the operator and the food does not fly from the bowl. Most lids are made of strong, clean plastics and have grooves along the side to help capture the lid in place. The upper part of the lid also includes a high cylinder, where food is released during operation. This roller allows the operator to add food to the machine without having to turn off the machine or open the lid. The lid must be connected to work the work of the kitchen robot and once the lid is secured by the astroj, the blades turn in the bowl to chop food. The bowls contain a handle so that processed food can be easily poured out of the bowl. Many processor bowls soé includes measurements along the side, so the operator can see how much food has been processed.

One of the most useful parts of the kitchen robot is pushing. Pusher is designed to fit comfortably into the high cylinder on the lid of the processor. Its purpose is to push food into a bowl or blade carrier while the processor runs. The pressure diaphragm prevents the meals from flying out of the bowl from the blades and is also a safety feature that prevents the operating in sharp shoulder blades.

a variety of part in the kitchen robot parts come from the side dishes of the blade. Basic machines often come with a S -shaped blade that sits in a bowl and is connected by the center pole. When the TUCEPEL machine is rotated inside the bowl and chopped food into small pieces. The blades will rotate continuously or can be set to spin if the machine is converted to the pulse position.

Other types of parts of the kitchen robot include slicing, mCrown and shredding blades. Unlike the S -shaped blade, which is inserted in a bowl of a kitchen robot, these other blades actually sit in a round blade carrier. The carrier is flat and has a pillar in the middle that fits in the center of the bowl. The carrier appears interchangeable blades and when the kitchen robot is rotated, the carrier turns, so the blades cut into the supporting upper part.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?