What are the different types of subwoofer attachments?
Four types of subwoofer attachments are available from speaker manufacturers, including endless partition, closed, transmitted and belt passes. The connection of the subwoofer is commonly made of thick wood -shaped wood, securely assembled nails to prevent any rattle between wooden joints. The sound moves through a wooden box to provide a deep or flat bass, depending on the selected type of subwoofer cover. The front of the subwoofer is physically attached to the board, such as thick plywood, allowing the rear cone of the speaker inside the trunk structure or deck. Unlike other subwoofer covers, the case uses an endless suitcase or deck as a cover structure. The bass produced are relatively flat, but offers a cheap selection of the subwoofer for those who have a budget.Krabice, which only allows the front cone of the speaker to stand out out of the box. This type of cover emits a solid bass without producing a vibrating boom, in a compact cover design. They buyThey should be aware that the enclosed subwoofer attachments must have an accompanying amplifier to provide the necessary power for an adequate bass output. The amplifier must match the subwoofer in power. Lack of energy can cause weak sound, while excessive energy leads to damage to the subwoofer.
The portable subwoofer enclosures use the same design construction as a sealed speaker, but the cover has added opening near the rear of the cone. Opening or port allows the rear sound waves to be based on the cover. The movement of the front and rear sound waves together creates low -frequency bass that many music enthusiasts enjoy for Rock and Roll songs. The main disadvantage of the transferred design of space consumption; The insertion must have space for the physical speaker and the shape of the tube for the port itself.
DesignsPass Pass generate a flourishing sound that is commonly heard from loud reproding systemswhich of the car. This type of cover uses two spaces in the box; One side holds a closed subwoofer and the other side has a tube to transfer sound waves. Designers of the speaker cover can change this internal structure and add more ports at different angles to achieve different outputs of bass outputs. A louder bass boom requires a large cover structure, especially if there are many ports.