What is coaxial for an optical converter?
2 These are most often used in home sound and home theater, where the source and receiver are not directly compatible. Converters with higher end converts are able to work in both directions and convert an optical input to coaxial output as needed. Physically, the most coaxial and optical devices for converters of small boxes with connectors at both ends to accept one of the two types of plugs. Most converters must be connected to an electrical outlet for operation but to draw small energy.
Optical sound has several advantages over older technology, such as coaxial, including the ability to maintain sound quality over more distances. In general, with any distance more than about ten ft (three m), the coaxial cable begins to suffer from disturbing and degraded sound. The high -quality optical cable does not suffer from this limitation and reliable maximum lengths can reach up to 33 ft (ten m). In addition, the optical cableIt is also not subject to interference with frequency that can brake the coaxial cables located too close to the power cables.
The technology required to convert coaxial signals to optical is not cheap and coaxial for an optical converter, although it may seem like a small, simple device, it can be quite expensive. Optical sound technology has also been replaced by high -resolution technology (HDMI®), which is relatively cheap, better quality, and combines audio and visual data in the same cable. However, some older home cinema devices do not have HDMI®, so Toslink® is the best available sound quality option.
Although optical sound is digital technology, some coaxial for optical smugglers cannot release in spatial sound. Therefore, while the coaxial signal from the DVD player can be in the 5-1 channel, for example, after flowing the converter will only be reduced to a two-channel stereo signal. Potential buyers should surely check ifThe coaxial coaxial for the optical converter in this respect meets their needs.