What Is Ring-Fencing?

A fence is a fence. The electronic fence is the most advanced perimeter burglar alarm system. It consists of the electronic fence host (JS-TD2010) and the front detection fence. The electronic fence main unit generates and receives high-voltage pulse signals, and can generate alarm signals when the front-end detection fence is in a state of contact, short circuit, or open circuit, and sends intrusion signals to the security alarm center; the front-end detection fence is composed of poles and metal wires. Composed of tangible perimeters. Multi-level networking can be achieved through the control keyboard or control software.

Industrial fences (such as factory fences, commercial field fences), agricultural fences (such as field fences, livestock fences), civil fences (such as building fences, fence walls, etc.), public facilities fences (such as roads)

Fence Notes

The first is the analysis of attention during installation. In general, you need to pay attention to the following points:

1. Do not use the system around flammable and explosive materials. When using it under special circumstances, keep a safe distance;

2.The host cannot be installed in a humid, high or low temperature environment;

3.Do not install during thunderstorm days;

4.The main box is installed at a height that is easy to repair and maintain;

5. Whether there is a strong interference source (such as high-frequency equipment such as a transmitting station) near the installation site of the fence device. If so, indicate that the signal line must be shielded twisted pair in the construction drawing;

6. In the event of an abnormal situation, the power should be cut off first, and the professional installation or maintenance personnel should be notified. Do not dismantle it by yourself.

7. The user must have knowledge of electrical safety and electrolysis, and must have professional training and be familiar with the correct use of the product.

The second problem is the angle during installation. The installation angle of the electronic fence mainly includes four types: inward tilting, outward tilting, vertical or horizontal mounting. As for the specific application, the method is mainly determined according to the specific situation. Here is a brief introduction to the angle of the fence installation next perimeter.

1. According to the object to be protected: it is recommended to install it in an inclination to prevent outside invasion and inward to prevent it from overturning inside.

2. According to the perimeter environment: the residential area and the vicinity of the school are recommended to be tilted or installed vertically. The open area is recommended to be tilted out. Horizontal installation can be used when the fence is higher than 2.5 meters.

3. Determine the perimeter fence angle (0 °, 22.5 °, 45 °, 67.5 °, 90 °, 112.5 °, 135 °, 157.5 °, 180 °) and the tilt direction (inclination, Extroverted, vertical or horizontal installation).