What are the different types of heart rate tests?
heart rate tests are used by doctors to determine the patient's heart rate. Patients suspected of slow, fast or irregular heart rate undergo heart rate tests within the diagnostic process. Heart frequency problems are often sporadic; Therefore, different methods are used to induce a problem, while health workers observe. Once the problem is identified, the treatment plan has been designed. Tests are sometimes repeated over time to control the effectiveness of treatment. Electrocardiograms
provide one method of diagnosis of arrhythmia. The test measures three wavelengths: wool P, wool QRS and t waves. The first two waves come from different heart chambers; The wave records when the heart returns to the rest state to release another rhythm. Electrocardiograms do not require sedation and are completed in about three minutes.
lead wires are attached by sticky adhesive over the chest and every arm and leg. The test is running and the recording of the TSRD frequency is printedon paper as a permanent record. This test can identify which type of arrhythmia has a patient, but because the arrhythmia can be sporadic, it is not always accurate. It is usually used as an initial examination due to its low and non -invasive method.
Holter monitors are also on the list of heart rate tests due to cost efficiency. They are also used when the patient is suspected of having problems with sporadic heart rate because the test lasts at least 24 hours. The patient is equipped with a small monitoring device connected to the heart guide on the chest. In some cases, the patient simply carries the monitor for the prescribed number of hours and then sends information via a fixed phone to the doctor's office.
In other cases, patients are told to press the button on the monitor every time they have heart rate and record in the note of what activity do they do when, whenThe event began. This is effective in identifying heart rate triggers. Fast heart rate is often triggered by caffeine, nicotine, stress and other easy -to -control factors.
6 The patient is attached to the table and equipped with heart rate and blood pressure monitors. The table then tilts slowly until the tilting is 65 degrees. The heart rate and blood pressure are constantly monitored to determine at which point the heart reacts badly and causes the patient to faint. Under these medical conditions, the problem can be diagnosed.Electrophysiological test is one of the heart rate tests completed in the medical environment. The patient is slightly calm and the tube is guided by the body from the femur to the heart. A camera is connected to the tube, giving doctors of the visual ventricles. Once in the heart, the doctor uses different techniques to trigger the problem of heart rate and examines different drugs to find out which problem will stop. In some cases there is an area where it beginsheart rate, cauterized and destroying tissue in an effort to permanently cure arrhythmia.