What is the current regulator?
The current controller is at work every time a mobile phone is charged, a car starts, a computer is connected, or a small electrical device is turned on. Sometimes they are called voltage regulators, current controllers reduce and reduce the amount of electricity to the level that is necessary for the operation of electrical equipment. The Standard House Current in the United States (USA) is 110 volts, which is 240 volts in the UK and a lot of Europe. However, many electrical equipment requires only a fraction of the incoming voltage-Divete comes into play The current regulator. For example, computers usually require only 20 volts and mobile phones require only 3 volts. Current controllers in both cases are usually part of the cord that is connected to the wall and then to the device.
Most of all current controllers for consumes of appliances are among the circuits are circuits for constant current control. These circuits keep the current to the device at a constant level to prevent damage. Since the tension of the householdIt can also fluctuate slightly due to changes in the overall capacity of usefulness or drains on the electrical system of the building, this type of fluctuation can cause a failure of sensitive devices or stop working. The constant current circuit receives available voltage and stabilizes it to a constant and reliable low voltage level.
The simplest type of current controller is the voltage regulator that only acts as a transformer-down. It does not contain any constant current circuits, as used for more robust devices that are designed to operate in acceptable voltage fluctuations. Common types include those found in the initial systems of some cars, large appliances, machinery and transformer dibis of passengers abroad.
Most common devices for Conperices controlOn a proposal or other interaction. Universal current regulators are usually equipped with user switches to change the output voltage to power different devices. Commercial and industrial currents are installed on certain types of machines, where it is necessary to change or modify different voltages for different phases of machinery. These are commonly used to change the engine speed to the power supply, but work on the same principle of standard current converting to lower levels.