What is brass fittings?

Brass fitting is a process in which the metal press exerts extreme pressure on one piece of brass or brass alloys, which was heated to about 1,500 degrees F (815 ° C). The softened metal is then forced, beaten and shaped to form a part made of a single piece of brass and without imperfections. Different methods of brass fittings can create almost any type of three-de-de-de-de-de-de-de-de-demenic shape, weighing anywhere from several ounces to several tons. Different types of brass fittings include impression or enclosed fittings for fittings, open fittings, cold and trouble -free rolled ring.

The process of brass fittings actually increases metal by about 15% stronger than parts of mold castings, because the process does not change the metal structure. The extruded brass stock is made in shape already close to the final part, to which it will be created when the brain warms them. Brass fitting is reduced by metal scrap and is faster than machining parts. The fitting process produces a surface without pores thatIt puts on a more attractive brass part.

Closed fittings, also known as fittings, use two or more died in the shape of the desired part. The brass heats up until it becomes slight or reaches the plastic state and is then compressed by the machine. Some machines of dying are able to create a compression force of £ 5,500 (£ 2,500) or more to create forged parts. This fitting process creates brass parts that have an increased density, aligned grain flow and high strength. In this process, brass parts can also be curved or bent on one or more aircraft. During the brass brass casting methods, enclosed brass fittings produce extremely strong and durable products.

In the open matrix, which takes place heated, small -scale brass, is not limited in the matrix or form. Instead, it is done using two flat surfing without the type of impression. This type of brass fittings is usually used toCreating and shaping very large individual pieces of brass up to £ 80,000 (36 363 kg) or more. This open matrix process is usually used for running with a lower amount of production and its own brass fittings on larger parts.

While most fittings are performed at extremely high temperatures, cold brass fittings only require brass to be heated to several hundred degrees. To create things such as coins, automotive steering, anti -lock systems and other smaller parts that weigh less than £ 10 (4.5 kg). This process creates parts that require high strength and tolerance.

The rolling ring fitting uses round, open parts in the shape of a ring that were shaped by means of an open death fitting process. This type of fittings are performed by forced pressure of two axial cylinders, the driver's cylinder and the tensioning role. The brass ring is rotated by the blind on the freewheel while exerting the pressure of Naon inside the ring. The role of the controller applies the pressure to the outer edge of the ring. IThe process proceeds, the ring flatter until the desired ring diameter is achieved.