What Is Ground Remediation?

Ground leveling refers to leveling the original ground of a building through a certain method to make the ground flatness reach a certain standard, which is in line with national regulations on ground leveling.

Ground leveling

Ground leveling

The former uses ordinary cement mortar for leveling. The leveling has large defects. First, the flatness control cannot be maximized and the leveling thickness is high. Second, the construction process is easy to increase the floor of the house due to the technical problems of the constructor .

The latter is self-leveling. This is a new leveling technology, which started out in the domestic building floor industry in 2005. It uses highly polymerized self-leveling cement for floor treatment, which has many advantages. It can level the thinnest floor at 3 mm. It has good thickness controllability, high ground strength, and flatness much higher than cement mortar leveling. Can be used for home improvement floor leveling. Ground handling for various sports venues, hotels, offices, precision electronics workshops, etc. Floor leveling in front of home renovation paved wooden floors is also suitable for self-levelling floor leveling. The leveling prices of ordinary regular ground companies and cement mortar leveling prices are basically the same. Choosing self-leveling is becoming more and more cost-effective.

For home improvement. The ground leveling is generally because the wooden floor is installed, or the epoxy floor is made, and the floor is uneven. How can I tell?

1. We usually use a two-meter ruler for carpet measurements. That is, at least the measurement of the crossing direction is performed at the same position. If a gap larger than 3 mm or even 5 mm appears below the ruler. This indicates that the ground is uneven. It has exceeded the requirements for paving wooden floors. In many cases, some friends will think that 5mm is not that important. Hard signed the floor company's construction commitment and forced to install the floor, resulting in a floor noise. The lock was broken and the corners were dusty. The floor feels like a seesaw, and at this time, the loss is great. And due to forced construction flooring company can not give you any compensation. So if it is flooring. Whether it is solid wood, reinforced or reinforced composite flooring, the pre-treatment of the floor is very important.

2. In addition, if the ground is not strong enough, you can lift up the ash with your feet. This is what we often call ash. This phenomenon is annoying when you clean the floor after you install the floor. No matter how you clean the corner, you will keep dusting on the floor. People walked on the floor and applied pressure, causing the ash to pop out from the skirting and corner positions. This is due to the fact that the grassroots treatment is not in place when the ground is leveled, so it is a professional ground company to try to use when leveling the ground. Don't try to save the decoration company or guerrillas hastily.

Since 2005, it has been widely used throughout the country since leveling. The standards for building floor leveling have once again updated the parameter standards. The following standards are mainly for home improvement floors

Drop within 2 square meters> 3 mm [Uneven ground]

Drop within 2-3 square meters 5-10 mm [severe unevenness]

Drop within 2 square meters 3 mm [ground qualified]

Special attention should also be paid when selecting self-leveling raw materials. There are many types on the market. It is mainly divided into home improvement type (specification DP180). Industrial type, high-strength commercial type. It is important to choose the right raw materials. General ground companies will help you choose the right materials!