What is capturing after the combusing?
Many businesses, especially power plants and industries using petrochemicals, produce a large amount of carbon dioxide from hydrocarbon combustion and that carbon dioxide must be captured in the process of capturing after the end of the combat, so it does not affect the environment. The most common method for capturing after the end of the combat is to go through a carbon with a solvent that absorbs excess carbon. The capture unit itself is relatively simple. This process is one of the most popular for carbon capture and has been used since the age of 40, partly, partly because it fits in most industries. The problem of using this process is that it has high operating costs and plants use from 10 to 30 percent more energy to capture carbon. To reduce the amount of carbon relaxed into the atmosphere, capture after the end of the combat is used. The smoke gas passes through the capture unit that combines the solid -gas gas with a solvent. Aminic solvent are usually usedLa - or nitrogen -based ones -. The amine solvent absorbs and captures the carbon from the smoke gas, so the carbon can be transported and saved later.
The unit of capture after the combus is relatively simple and usually integrates into the combustion chamber itself. Air and hydrocarbons are pumped to an area where they burn and create energy at a high temperature. The exhaust gas is pumped into the amino tower, where it is immediately mixed with nitrogen and pushed down for storage.
Post-COMBULATION has been used since the age of 40, and the reason is so popular that scientists and industrial workers have a lot of experience. Another reason is that the capture unit can be easily equipped or add to an existing race. The capture unit is so simple and well known that repars are easier than other systems.
While capturing after the combusing is popular, existsCertain disadvantages for using this system. There are high operating costs, because the company will have to buy a permanent current of the amino solvent to maintain the capture unit. The capture units are also the best for small and medium operations; Extensive operations are usually beyond this unit. Plants must also use from 10 to 30 percent more energy depending on the solvent used, to capture carbon; These costs are usually pushed to the company's customers.