What is a sterilization tray?
sterilization tray is a container in which medical and surgical tools are placed before loading into the autoclave for sterilization. Autoclave is a device that uses high pressure pairs to control tools of any microbial organisms before medical procedures or surgery. Usually there are a number of sterilization magazines that fit into the autoclave at the moment. The trays can be made of aluminum, stainless steel, durable plastics and composite or hybrid materials. This method combines the strongest aspects of plastic and metal.
aluminum sterilization trays are commonly used in medical offices, but ordinary aluminum tends to be easily oxidized when it is inside the autoclave, so most of the aluminum sterilization bowls areodized. Anodization is a process of coating the aluminum sterilization tray with a protective oxide layer. This is due to its durability and low weight. Stainless steel trays are more expensive and somewhat heavier. Plastic sterilizationThe blocks are relatively durable and very light.
The process of sterilizing the device seeks to eliminate all microbes. This can be difficult and testing is done to see if they were killed the most effective and resistant microbes. If they have expired, then there is a justification that weaker microbes will also have. Bacterial spores are the most durable and are used as a barometer of the efficiency of the sterilization process. This process is referred to as biological monitoring.
Once surgical tools are stacked in a sterilization tray and placed in an autoclave, high -pressure steam is usually subjected to up to 20 minutes. The size of the load and trays will also somewhat determine the time of the autoclave. The sterilization tray and tools are steamed at approximately 250 ° Fahrenheit (120 ° Celsius). There are a tray that is designed for what is known as cold sterilization, but this is not recommended because the tools of PonoDamage can suffer damage in any type of liquid for more than twenty minutes. It is known that certain solutions release tungsten carbide in some tools.
Once sterilization tray and tools are sterilized, they are usually monitored and controlled. Sometimes the residues can remain on the instruments and bacterial spores may still be present. If disputes are detected, the whole process is repeated. Methods used to monitor the presence of spores include spore strips enclosed in the protective case, chemical monitoring and mechanical monitoring. This can mean closely monitoring the maintenance of the machine itself and serving it if unusual sounds arise.