What are the best tips for maintenance of the transport belt?
There are many different types of transport belt systems and even more applications where they can be used, so the best maintenance tips may vary from one situation to another. In general, it is recommended to fully switch off the transport belt before performing any maintenance operations and clearly mark the system so that no one accidentally activates it. In order to make any maintenance of the transport belt thoroughly, a type of control list should usually be used. The exact content of the inspection list may vary from one application to another, but often include items such as belts and buckle status, pulleys and idle vehicles and whether the belt is properly monitored. All items listed on the checklist should be resolved before closing the conveyor belt maintenance procedure.
Some of the best tips for maintenance of conveyor belt include safety. In most cases, it is very dangerous to maintain maintenance on the conveyor when it is in operation, they should usually be turned off and disconnected from the energy source first. Himthat it is also dangerous if the system is reactivated during maintenance or repair inspection, so it is important to clearly indicate controls, including circuit breakers. When working around the conveyor belts, it should be avoided with bag clothing and safety lines or harnesses should be used when working on a conveyor that is suspended from the ground.
When performing inspection of the maintenance of the transport belt belt, the system should be turned off and checked first. This can allow you to check the belt, along with any joint, football boots and other components. The belt should only be cleaned after the system is switched off, so scraps, pulleys and other objects that accumulate contaminants should. After this part of the inspection, usually recommend the system while still empty. When the lined road belt is activated, it is usually possible to identify and solve any problems with incorrect monitoring.
If some problems are identifiesOna during one part of the inspection process, it is important to document it together with the necessary corrective measures. These problems can then be solved as part of the ongoing maintenance program of conveyors, or immediately if the situation guarantees. Before returning the system, the final step is the final step of the maintenance of the transport belt belt lubrication of all the necessary parts.