What is a condensate polish?
Condensate gloss is an installation designed to remove dirt and monitor minerals from the steam of the power plant. Condensate is collected as a by -product for reuse as boiler power water and requires all impurities to be removed before re -introduction into the system. This is a preventive measure that prevents damage to the boiler corrosion and increased maintenance requirements. Polishing condensate removes dirt, such as silica and iron oxide, by passing the condensate by the bed with specially formulated polymer resins, which serve as ion and physical filters to produce pure demineralized water. Once the bead cleaning action is exhausted, they are either flushed and regenerated, or in the case of installation of a nuclear plant, sent to a radioactive waste processing facility.
Most electric power plants produce a large amount of steam as a product process. In most cases, steam can condense for reuse as feed water for boile equipment. JEdna is about healthy financial and environmental practice, thus increasing the plants more cost -effective with reduced environmental traces. However, the reuse of condensate is problematic due to a large number of dirt -generated processes suspended and dissolved in steam. Installation of condensate polishing is cleaned by condensate both of the dissolved dirt oxide oxide oxide, as well as suspended solids of iron oxide, and return usable water without minerals to boilers.
condensate polisháras work on chemical and mechanical levels by ion exchange and physical filter processes. Both functions are achieved by passing the condensate through the beds of specially formulated polystyrene polymer balls. During its passage beaded beds are melted dirt, such as silica oxides, removed from condensate by the ion exchange process between beads and dissoleD dirt. Polymer resins used to produce balls can be either of anionic types or types of canions that remove negative or positively charged ions. In many applications, mixed resin beds are used to remove both at the same time.
suspended solid dirt are eliminated by the mechanical filtering process when passing beads. In general, these are iron oxide or solids particles that are poured out of the device during the equipment process. After a period of use, beads are saturated with solids and their ion exchange capabilities are exhausted. Beads can then be removed from condenser polishing and rinsed to remove all trapped solids. The chemical structure of the balls is also regenerated during the process and restores their ion exchange capabilities. However, due to the highly regulated nature of nuclear energy production, beads from fusion plants from fusion plants from fusion plants were exhausted generally to be transferredEmployment for radioactive waste disposal.