What Is a Smart Actuator?

ABB Intelligent Actuator is an actuator model Md [Nm] [1 / min] ISO 5210 / DIN 3210. It has strong adaptability and good mechanical and electrical adjustment characteristics.

ABB Smart Actuator

Right!

ABB Intelligent Actuator is an actuator model Md [Nm] [1 / min] ISO 5210 / DIN 3210. It has strong adaptability and good mechanical and electrical adjustment characteristics.

Chinese name

ABB Smart Actuator

Features

Strong adaptability and good machinery

Function

Monitoring parameters of output load

Strong adaptability, with good mechanical and electrical adjustment characteristics, advanced micro-processing technology and communication interface connected with PC or DCS, adopting general Hart or Profibus communication protocol, accepting analog or digital signal control, the user can control the Configuration parameters such as parameter adjustment, function setting, actuator action setting, remote monitoring, etc. can be performed to suit the best control characteristics of the valve.

Use the motor slip ratio as the monitoring parameter of the output load, instead of the traditional butterfly spring assembly or other pressure sensor devices, cancel the mechanical torque adjustment device and torque switch, and use the microprocessor to make the torque protection value according to the field work According to the requirements of the situation, the detection motor slip rate can be arbitrarily adjusted as a monitoring parameter of the output load. Instead of the traditional butterfly spring assembly or other pressure sensor devices, the mechanical torque adjustment device and torque switch are eliminated. The microprocessor is used to protect the torque. The value can be adjusted at will according to the requirements of site conditions.

Model Md [Nm] [1 / min] ISO 5210 / DIN 3210

MOE 706 24-60 7-35 F 07

20-50 24-92

12-30 36-180

MOE 708 24-60 7-35 F 10 / G0

20-50 24-92

12-30 36-180

MOE 712 48-120 7-35 F 10 / G0

40-100 24-92

32-80 36-180

MOE 725 80-250 7-35 F 14 / G1 / 2

80-200 24-92

60-150 36-180

Actuator running torque cut-off torque speed flange size

Model [Nm] [Nm] [1 / min] ISO 5210 / DIN 3210

MME 806 30 24-60 7-35 F 07

MME 808 30 24-60 7-35 F 10 / G0

MME 812 60 48-120 7-35 F 10 / G0

MME 825 125 100-250 7-35 F 14 / G1 / 2

Standard bearing model cable interface

Center high pole number D-end & nbs