What is destructive testing?

Destructive testing is a type of testing used in production that eventually destroys a tested sample. Destructive testing is used to determine the reliability, safety and life of the products, often used to test welds, but is probably the best known as a method for testing car safety. Destructive testing comes in three forms: stress or stability; impact or security; and hardness or resistance, tests. When dealing with bulk items produced, this form of testing is also cheaper than other methods, as only a small handful of product will be destroyed. However, this method may be expensive when dealing with other products. Destructive tests can be carried out on the product at any time in development, from the beginning of research to phases ready for production. They are generally recorded by high -quality cameras that are designed to capture every test detail. Tests also use a number of measuring devices that give accurate conditions at the breaking point. Temperature, pressure and other typesSensory data are almost always recorded for later studies along with the visual protocol of destructive test.

welds, in particular, pass many types of destructive testing when used on products. The weld is a bond that connects two pieces of metal by melting the metals together. It is used on a number of different products, including vehicles and buildings, so the strength and reliability of specific types of welds is important.

The welds are undergoing stress, impact and hardness tests. Free bending tests, Nick Break, Etching and Fillet Weld are all types of stress tests that test the sound and quality of the weld. The impact tests are designed on the break weld in one wound at different angles. The slopes are also subjected to tensile strength tests that pull out the welder at both ends until they fall apart. Recording under what conditions gives weld breaks to scientists important information about what this type of weld can be used and howThe conditions would cause the weld to be dangerous.

destructive testing is wise for anything that could be exposed to extreme conditions. Car manufacturers use impact tests to find out what actually happens to the car when it is in a collision. These tests allow scientists to test real -time safety procedures, which would be impossible if the car had to maintain intact. However, destructive testing is only useful for human conditions. For example, the International Research Center of the Hurricane in Florida uses destructive testing on the roofs of houses to try to alleviate the damage that the hurricanes cause to households.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?