What is involved in zinc-ticking plating?

Zinc-ickel fasting is a process that is stored on the substrate metal layer of a zinc compound. The use of Zinc-Nickel alloy helps protect these other materials and contribute to their aesthetic suitability. This alloy is applied to other metals using different electroly techniques, including the bending of the barrel and plating the stand. The basic process for plating zinc is electricalCing. This technique uses a chemical bath and an electrical system with anode and cathode. Zinc and nickel plates must be dissolved in a chemical bath before they can create a zinc plate and nickel compounds. Solutions can be either highly acidic or highly basic and are commonly produced either with chloride or cyanide. At one end of the tank is an anode through which electricity enters the system. On the other hand, there is a cathode through which electricity comes out of the system. Zinc and nickel ions have negatively charged and attracted a positively charged cathode. Over time, it holds on the cathode and the plating of the zinc-unickelRom. The amount of zinc in the compound is usually between 85% and 95%, while the rest of the compound is nickel. This alloy is stronger and more resistant than Zink itself.

zinc-tuning belt can be done in barrels or shelves. In both of these processes, the material to be applied from the zinc alloy is placed in an electrified solution. Zinc-ticking is grown on the surface of the material as in traditional electrolyration.

The barrel displacement is often used to a plate of many small parts at the same time. It can be used to shoot any size with an alloy if the substrate can be free inside the barrel. The barrel turns at different speeds. Faster rotary rotation speeds are produced by zinc plating, which is more uniform.

Stands can also be used to hang substrate materials that require zinc-water plating. Materials are running into an electrified chemicala solution where zinc-niche board is formed. The areas on the substrate that are suspended do not receive plating. Zinc-tuning by this method is not as uniform as the plating, which is based on the process of placing the barrel.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?