What is a propane solenoid?
Propane solenoid is a control component of valves used as automated or remote substances to control flow on propane gas systems. These units are usually one -piece, integral assemblies that consist of solenoids mounted on a brass or stainless steel gas valve. The solenoid components are generally closed units designed to represent the minimum risk of ignition of the spark of propane gas. The solenoid and propane valve set is usually mounted in close proximity to the propane source that reduces the system that is flooded with gas when the valve is closed. This proximity to the gas source requires a careful selection of the right solenoid and the related safety device to minimize the risks of explosions and fires. In many cases it is a simple, manually operated flax valve of the main outgoing line of the gas. In some cases, howeverfalling needs. This is a safety measure used to minimize the amount of propane in the system during the idle periods. In these applications, the propane is the most commonly used solution.
These valve assemblies are usually one -piece units that consist of brass or stainless steel valve set or membrane -type with integral solenoid component mounted on the valve. The solenoid works in the same way as everyone else and consists of a static coil and a movable spring metal piston. When the coil is below a suitable electric current, a powerful magnetic field is generated around it. This magnetic field attracts the piston and quickly attracts it towards the coil. When the force is cut into solenoid, the spring returns the piston to its neutral or inactive position.
PLOK solenoid propane is connected to a valve stem, which then either seats orOpens popular or membrane, effectively opens or closes the valve. The solenoid assembly is usually closed in a closed plastic or aluminum cover with a pre -connected coil conductor. This minimizes the risk of exposed connections that pose a risk of spark ignition in the presence of a potentially explosive mixture of propane and air. Although seemingly opposed to this safety regime, the propane solenoid valve is generally located as close as possible to the gas source. In fact, this is the safest location because it effectively reduces the pipe area of the system that is filled with gas when the valve is closed.
However, any electrical equipment represents a certain amount of explosion when used near flammable gases. For this reason, it is always highly suitable for propane solenoid valves to be maintained in good condition and properly evaluated to prevent the coil from overheating. Other devices safe for failure that are designed to cut off delivery P should also be usedLyna in the case of fired pilot flames, such as a device that prevents dangerous gas accumulation.