What is the spring return drive?

Spring return is a control device that adds a one -way driven movement with an impulse for its return thrust supplied by the spring. For example, the spring return door drive will only open the door under its own strength, and the door will be closed again by the spring arrangement. Simple solenoid is a good example of the spring return driver, while the solenoid plunger has been returned to its neutral position by spring voltage. The fact that the drive only supplies a one -time stroke is simplified by the control system management with a reasonable reduction in unit costs and maintenance requirements. Spring return has usually a longer life, which further increases cost savings on such systems.

Conventional bidirectional drivers give the power activation power for both their work and return strokes. This is usually achieved by perverting the direction of the electric motor or in the case of hydraulic and pneumatic systems, drawing the oil or gas on the opposite side of the control cylinder. On the other handThe spring return only uses the driven stroke in half of its working cycle. The impulse for the back stroke that reset the mechanism to its neutral position is supplied with the arrangement of spring. One of the best examples of this concept is the linear solenoid, which uses the spring to return the piston as soon as the power is cut into the coil.

There are many types of spring return drive mechanisms for both linear and rotary output applications. In some cases, the return spring is an integral part of the control mechanism and in others a separate unit. The speed at which spring returns through the secondary mechanism is often controlled to produce a specific reset speed. In many cases, this control function is achieved with the kind permission of a separate hydraulic shock absorber, which is usually equipped with adjustable valve moistanism Ing, enabling the setting isMen's speeds.

One -time Stroke of the spring control has several advantages, including low installation costs, long life and reduced maintenance. Advantages can be attributed to the relative simplicity of systems and a reduced number of control elements and cycles needed for their operation. This means slightly lower initial costs and reduced run expenses. It also ensures excellent longevity of the driver and its power sources as only half of the normal service cycles performed for each control.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?