What is the soldering of resistance?

Resistance is the process of joining metal pieces that uses an easily molten material called solder. In this form of soldering, the heat that melts the solder generates electric current to the soldering and solder tool. A standard voltage source is usually used to ensure this current. Generally, the-down transformer is going through to provide low voltage, high current. This allows you to generate high amounts of heat in a very small area, allowing fine soldering small or narrowly placed components. For example, light bulbs generate light and heat due to a current running through the fibrous wires inside the bulb. Like the bulb, it can be quite hot, so other materials. Soldering of resistance uses this to melt the solder, which is then used to connect to the metal pieces.

There are many advantages of using this soldering method over traditional methods. Heat is generated only in a limited area and rIt is distracted, so the risk of damage to small or closely distributed components is lower than in some other methods. The rate of production can be increased when soldering resistance, as heating is almost immediate and the work cools down much faster than with traditional soldering. Operating costs may be lower due to more efficient use of electricity and smaller equipment of equipment

Safety is another area in which soldering resistance offers advantages over other connections. Heat is only generated during the actual soldering operation, so there is no chance to come across iron that is hot but sitting near the operator. This method also avoids the use of open flame, as necessary in some axis. Fast cooling of work pieces after soldering also helps to avoid accidents.

While soldering resistance offers numerous advantages, it has some disadvantages. The initial costs of the equipment are usually higher than the cost of traditional soldering. A typical soldering surgery of resistance is on somewhat complexThe station, unlike the simpler and more transformed traditional iron soldering method. This station generally includes a relatively bulky power supply for generating the required current, soldering probe and pedal to perform actual assembly procedures.

Welding and soldering are similar to metal connection processes, but differ in some key ways. Welding includes melting not only filling material, but also connected by two metals, while soldering resistance only melts the solder applied to connect to metals. Soldering and soldering include melting only the filling material, but when soldering this filling material has a much higher melting point than the filler used in the soldering of resistance.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?