What are the different types of gas grill parts?

parts of the gas grill may vary somewhat between manufacturers, but there are some parts that are basic for all grills. Almost every gas grill will have a body and bonnet, gas source, hose, controller, controls, venturi tube, starter, burners, barriers and cooking surface. All these parts cooperate on creating an amazing smoke taste that grill enthusiasts love.

The grilling body is the largest part of the grill. It is a metal body that holds all other parts of the gas grill. The bonnet is a lid that closes at the top of the body and creates a closed area of ​​cooking. This closed area is what grilling heat does at a fast and high level. The plaster tank has shut -off valves that protect the consumer from leakage and the valve should always be turned off when it is not used.

The main hose is connected from the gas source to the controller. The regulators are set by the manufacturer to control the gas flow to the control area. The gas then flows to the control buttons that consumeEL uses to determine the amount of gas pushed into the burner. The more gas, the higher and warmer the flame. Usually there are at least two controls, each of which connects to its own burner.

Venturi pipes connect control buttons to the burner. There is a small gap in these fuel pipes so that the gas can mix with the air. Without this mixture of oxygen and propane, a flame cannot be created.

burners are usually subjects with hollow metal trays that have holes around the outer perimeter. These parts of the gas grill grill come in various heat resistant metals, from aluminum steel to brass. The gas is pumped through these holes and carries a flame that is produced by the starter.

The

flame is produced by a combination of gas and oxygen exposed to a spark. From the appetizer comes a spark, sometimes called a lighter. They usually look like a button on the grill. When pressing a small hammer hits a special material thatIt becomes electrically charged with pressure. This rapid charge causes a spark that lights the gas into the burner. Some lighters on advanced grill models are buttons that cause the spark to jump between two electrodes.

Above the burner is a barrier, sometimes called brilliant. The intention of the barrier is to absorb part of the heat from the burner and evenly divide it into the cooking surface. These parts of the gas grill grill also provide another level of burner protection because they drip on these first greasy. This also means that they should sometimes be replaced more often than the burner. Some grills use lava rocks or ceramic briquettes, while others use longer metal barriers.

The cooking surface is a metal grate that floats through the burner and barrier. The food is placed on the grate and leaves behind the beautiful dark cross pattern associated with grilling. They can be made of various materials such as cast iron, cast iron coated with porcelain, stainless steel, porcelain coated steel or installationfor steel.

Each of these parts of the gas grill is an integral part of the use of the home grill of easy and efficient use. Regular maintenance and replacement of gas grill parts can help the last for many years. With all parts that work together, the gas grill can provide great grilling whenever of the year.