What should I know about the driveway repair?

The driveway repair very depends very much on the type of driveway. If the driveway is a cement, it is the purchase and application of the filler cement to an area that needs repair. Repair of the asphalt driveway requires some special applications that differ depending on the size of the repair. On the day you use the sealant-last step in the driveway repair process, you can also want to stick or mask the home foundation and/or the garage door area to keep areas without images without applications.

Clean properly and prepare every targeted area that needs fixation. If some weeds or grass grow through the cracks, you will want to dig and apply the weed killer. Clean each area with warm water and detergent. Use a stiff brush to apply and watch Thorough rinse from the garden hose. If there are some stains of oil or grease, use an oil cleaner from the hardware store and follow the product instructions. TheseProducts are primers that require a little time to work.

For cracks smaller than ½ inches (12 mm) wide, you will use an easily available cracks filling compound that can be applied by a standard sealing gun, nozzle applicator or simply pour. Smooth the application sewn and let it cure. If the driveway repair is unusually deep, you may want to fill the crack with rough sand first to the compressed level of about ¼ inches (3 mm) from the surface. Apply to the remaining space to apply the filling crack, smooth the sealant with a knife and let it cure. For cracks larger than ½ inch (12 mm) wide, you will need to use what is commonly called a "cold patch" and available in many brands in a hardware store.

For holes, you need the product "cold patches", but may also have to break the hole to create a robust, straight edges and shape to another. If the correction of the arrival CE isIn style more than 2 inches (48 mm), break the pieces you have just dug, and use them as a filler to a level of about 1.5 inches (36 mm) from the surface. Apply the patch in the levels using the Trowel and Tamp procedure. Apply enough to lead a slight curve above the driveway level. Place the part of the plywood via the patch and park the car through the plywood to compress. After allowing enough time to treat (between 2 and 7 days or more, depending on the manufacturer's recommendations and weather conditions), apply the seal to the entire driveway.

Clean and cured driveway must usually be fogged with water before applying the sealant. Next, pour one leg (30 cm) a line of bakery across the part of the driveway closest to the garage or home foundation. Use a robust, long -term manipulated Squeegee to expand the line to 3 to 4 feet (about 1 m) and cover the edge of the driveway to the edge. Use a long handling rigid brush to smooth out the surface and repeat this process at the end ofíjezdé trips. Finally, block the entrance to the driveway until the appropriate curing time has been released.