What is a Voice Dialer?
The voice dialer is an auxiliary accessory widely used in anti-theft alarm systems. It is mainly used to connect with the alarm host and trigger the voice dialer for voice alarm while the alarm host sends out an alarm signal.
Voice dialer
Right!
- The voice dialer is an auxiliary accessory widely used in anti-theft alarm systems. It is mainly used to connect with the alarm host and trigger the voice dialer for voice alarm while the alarm host sends out an alarm signal.
- Below we take "Ledick LED-110 alarm voice dialer" as an example to make a brief introduction.
- Compatible with various brands and models of anti-theft alarm host, such as Honeywell (including the original CK, Andingbao), Maple Leaf, Bosch, etc., when the alarm bell rings automatically dials automatically;
- It can also form a simple and independent voice alarm system directly with infrared probes, door sensors, emergency buttons, etc. without the need to add an additional alarm host, which greatly saves costs;
- The microcomputer automatically records and plays the voice IC within 20 seconds. It can directly record or play the voice message for 20 seconds through the microphone and speaker of this machine, without the need to connect to a telephone.
- Set the alarm phone to "110", and pre-record the detailed address of the machine installation in the voice message. When an alarm occurs, the "110" receiving station can quickly reach the alarm site according to the voice prompt;
- It can also be used when the elderly or children ask for help. Pre-record the detailed address of the installation of the machine and set up a call for help, such as the family's mobile phone, community management office, emergency center "120", etc., when the elderly or children encounter an emergency You can send a message for help with just one touch;
- Can store 4 sets of phone numbers, mobile phone, fixed phone number, "110" are all available. When the dialer is triggered, the stored phone number will be dialed in a cycle. Dial 1 time, dial a total of 4 times; cycle three times, that is, dial 3 times for each number, dial a total of 12 times) to ensure that one will not fail to convey the alarm.