What is a Letter Folding Machine?
Paper machine refers to the machine used to fold paper. There are two-fold paper folding machine and four-fold paper folding machine.
Origami machine
- This entry lacks an overview map . Supplementing related content makes the entry more complete and can be upgraded quickly. Come on!
- Chinese name
- Origami machine
- Paper machine refers to the machine used to fold paper. There are two-fold paper folding machine and four-fold paper folding machine.
- Folding machine refers to the machine used to fold paper. There are two-fold folding machine and four-fold folding machine. The folding style of two folding plates is shown in the figure below:
- The folding style of the four-fold plate is shown below:
- Safety
- When operating the machine, you must have a good sense of safety judgment.Do not check the circuit without touching it.
- Don't make some dangerous operation while running, so as not to cause unnecessary loss to our personal safety.
- Structural principle of folder
- The paper folding machine consists of four systems: the feeder system, the runway system, the folding forming system and the book collection system.
- Feida system
- The Feida system is mainly composed of a fan and a paper-feeding Feida head.
- There are air valves that can be adjusted in size, and there are two air filters on the side of the fan, which need to be opened once a week for cleaning.
- The Feida head sucks up the paper mainly by suction and only one sheet at a time, and then uses the suction wheel to send the paper to the runway.
- 2. Runway system
- The runway system uses a rotating shaft to drive the belt to convey the paper.There is a row of pressure paper above each conveyor belt.
- The function of the paper pressing ball is to hold the paper and make the paper more stable in the runway.
- 3.Folding forming system
- The folding forming system is mainly a combination of a folding disk and a rubber roller to enable us to achieve a certain folding effect.
- The electronic knife folding is mainly through the paper to sense the electric eye to make the electronic knife move down to achieve the purpose of folding.
- 4. Book collection system
- The book collection system is mainly a paper receiving table receiving the folded paper through a conveyer belt, so that the paper can be neat and orderly.
- Overlapped together.
- Common faults and troubleshooting methods
- 1.The machine cannot start normally
- Check that the power and safety switches are all turned on.
- 2.Can't the electronic knife work?
- Check whether the induction electric eye is damaged and whether the electronic knife switch is on.
- 3. The desk is not working?
- Check whether the jack is in good contact and whether the speed adjustment switch of the receiving desk is turned on to the minimum.
- 4. Is the height of the loading table uneven?
- Check that the elevator chain is adjusted to the same plane.
- Four. Common exceptions exclusion methods:
- 1. The paper is skewed:
- The belts are not tight, the belt interface is uneven or broken.
- When the paper is uneven and hits the knife or the pull gauge, if the paper is found to be uneven when you load the paper, you can flatten the edge of the paper beforehand to avoid skewing the paper.
- 2.No code suddenly is wrong:
- The paper ball cannot fully press the paper, and the paper rebounds, resulting in inaccurate positioning;
- uneven pressure of rubber roller;
- The cutter is not sharp or installed improperly;
- 3. Jam when transferring paper?
- The paper is not fully folded into the page tray or there is a curling phenomenon;
- The conveyor belt is uneven or has a break;
- The lowering position of the folding knife is not enough, and the pressure of the folding roller is too loose.
- 4.The suction paper is not smooth?
- Check the size of the suction air and whether the nozzle piece is damaged.
- 5.The rubber knife rubs against the rubber roller when the knife is lowered?
- The electronic knife should be adjusted in the middle of the gap between the two folding rubber rollers, and the electronic knife has fallen too deep.
- Equipment repair and maintenance
- The daily maintenance, monthly maintenance, and annual maintenance regulations of the company's equipment should be strictly implemented. It is strictly prohibited to knock, hit, or smash the equipment.
- Carefully do equipment maintenance.
- 1. This type of automatic paper folding machine is a small desktop paper folding machine, which is suitable for folding paper in various ways, has a reasonable structure, and uses large rubber wheels to feed paper.
2. The minimum folded width is 30 mm, which is especially suitable for the folding of the instructions for medicines and cosmetics with a small width and a small folded width.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tri-fold inside, Tri-fold outside, Guanyin fold |
Outer Tri Fold, Guanyin Fold, Half Fold Inner Fold, Outer Tri-Fold, Half-Fold Inside fold in half, fold in half, outside fold, 50% off in half, 50% off outside |