How does geothermal technology work?

Geothermal technology uses the force of the earth's heat located inside the bark to provide energy for many uses. The level of sophistication in geothermal technology depends on what is happening and how much energy is done. Some systems can use very low heat levels to replenish the needs of space heating. Others can use very hot sources to produce electricity. Geothermal loops are installed and the heat transfer process brings heat to the building. This is usually achieved by adding water or antifreeze to the loop. This then brings heat to the surface where it is used and returns to the ground in a continuous process. And it helps to control energy costs, has very little different practical use. In fact, this process produces such a small energy that it cannot be used to complete the traditional methods of heating inside the structure. In order to get enough energy to transmit masses, much more sophisticated geothermal technology is required.

production of sufficient energy for extensive operation means finding enough heat that is close enough to the surface where the cost -effective, more heat is usually produced in many points on the ground. However, the places where it is found is the energy that can be produced is almost unlimited and very clean. Any product is usually excess steam, which is not considered harmful to the atmosphere.

Almost all types of geothermal plants work the same. Steam is used to power the turbine. The friction of the turbine produces electricity, which can be transferred using electric lines to its final destination, ready for use. Geothermal wells must be drilled. But the question is how to get a steam. In some cases, this is an easy answer; It is produced naturally. In other cases, other liquids must be placed in close proximity to heat to form steam. Either way, technology is still veryClean. Geothermal technology may therefore change due to the situation.

The cheapest type of plant is the one where steam is produced naturally. It is located in a geologically active area, usually marked with the presence of geyers or volcanoes. However, these geological features are sometimes tourist attractions. This could create a conflict between two competing industries. Finally, a local society is likely to make a decision that is more valuable, tourist dollars or cheap energy.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?