What is an accumulation conveyor?

The accumulation conveyor is a mechanism of specialized transport of material that is used in applications where goods require a transport route in the queue or accumulation at some point. In most respects, like a conventional cylindrical conveyor, the accumulation conveyor differs in that it includes mechanisms that allow the conveyor parts to slow down or stop the goods at that point. This is usually achieved by distributing the conveyor into short, individually driven sections, which include sensors and power clutches that allow you to run individual sections, slow down or stop as you will. This feature is commonly used in situations where palette, sorting or recording operations require that goods on the conveyor are accumulated rather than constantly flowing. This mechanism usually consists of a steel frame with a number of cylinders, gradually organized within its external members. In general, the rollers are placed in constant contact with each other. ItIt allows one driven cylinder to transfer its movement to all rollers in the series, driving the entire conveyor. In this way, the load, which was placed on the conveyor at any point, will be transported along the entire length of the conveyor on moving cylinders.

6 Where these stops are required, however, an accumulation conveyor is usually used. In most respects, these machines are similar to their conventional siblings with continuous during the cylinders along the length of the conveyor. The main difference between the accumulation conveyor and the conventional types is series cuts or individual zones that are created along the conveyor route.

One engine is generally controlled by the entire conveyor, with each individual zone having two driving points, one at each end of the section. The first point, which is equipped with a remotely controlled clutch, controls this section and the end drive is used to transfer the drive to the next section. In this way the whole Akum isThe conveyor is controlled simultaneously with the ability - for clutches - to stop the specific part of the belt if necessary. The stops are achieved using motion or pressure sensors, which are located at strategic points along the conveyor route. This allows the goods on the belt to be in the queue at a specified point when actions such as loading, pallet or carton recording are required.