What are the different types of cycling bikes?
Cycling bikes will vary in size, construction and materials according to the specific purpose for which they will be used. Some cycling bikes are designed specifically for mountain bikes, while others are designed for road cycling, free time cycling, winter cycling or other types of cycling for which a specific bike design may be required. The three most common industrial sizes are 26 inches, 29 inches and 700C wheels; The 700C wheels are cycling wheels specific to the road, while wheels 26 and 29 inches are commonly found on mountain bikes and free wheels.
road cycling wheels are higher than mountain bike wheels and are also much lighter and thinner. This is done to support aerodynamics and reduce rotary weight, which otherwise may slow the cyclist. Some road cycling wheels are equipped with rays that are flattened and placed so that air can rush over them with little resistance, similar to the wing of the aircraft. Lace -up to youChto beams or positions in which the rays are connected to the edge will vary according to a particular wheel, although the most common is the three-cross formula; This means that one of them is exceeded before connecting to the edge or below three three other rays.
Some wheels on the roads contain no rays at all. These wheels are known as disc wheels and are often made of carbon fibers. The bike is strong but still light and is designed to reduce as much aerodynamic move. Such wheels are very expensive and are usually used only on certain types of race wheels, such as wheels with time trial experience. The front wheel on such wheels sometimes has a formula of three beams, in which three large carbon beams connect the hub to the edge instead of a few smaller, thinner rays. These types of rims often have tubular tires that are tires designed to function as a tireI The Tube. Such tires must be glued to the edge.
Mountain bike wheels are wider, heavier and harder than road cycling wheels, as it is likely that it will last an impact after impact on the paths. Some mountain bikes, such as mountain bikes specific to the ski slope, have an extremely wide and heavy rim that can withstand the heavier impacts that such a bike will take. Racing mountain bikes often have light wheels, sometimes with rays and some rims are designed to operate tires; Therefore, the inside of the edge has no holes, so the air cannot escape when the tire is mounted on it.