What Is Limited Connectivity?

A local connection is a link created by a different network in your computer. When you create a home or small office network, a computer running Windows will connect to a local area network (LAN). When Windows is installed, the network adapter is detected and a local connection is created. Like all other connection types, it will appear in the Network Connections folder. Local connections are always active by default. Local connection is the only connection type that is automatically created and activated. "Local Area Connection" is called "Ethernet" in Windows 8 and above.

local connection

Local connection (local connection) refers to the link created by different networks in the computer, when creating a home or small

If the computer has multiple

First, manually set the IP: the method is to open "

Troubleshooting method: Replace troubleshooting

I. Hardware problems

1. Line problems.

Please use a line tester to test whether the network cable is unblocked;

2.

1. Right-click the computer icon-Management-Device Manager-Network Adapter on the desktop to see if the network adapter in the network adapter has a device that does not have the network card driver installed properly. If there is a device, a yellow exclamation mark, question mark, or red cross No., it may indicate that the driver of the network card has an error and needs to be reinstalled. Find the driver of the corresponding network card, download and restart the computer after installation.

2. Confirm that the Ethernet (Local Area Connection) restriction prompt will appear when the network card driver is normal. You can right-click on My Network Places on the desktop-Properties-Right-click Ethernet (Local Area Connection)-Repair (or enable it after disabling), and let The system automatically checks for network errors and fixes them automatically.

3. If none of the above can solve the problem of limited Ethernet (local connection), you can try to manually assign an IP address to solve this problem. Since some routers may not have the DHCP service turned on, you cannot connect each one to the router. The computer is assigned an independent IP address. Of course, if there is no IP address, network access will not be possible (when the IP address is automatically obtained, the IP will also need to be assigned). At this time, right-click Ethernet (local connection)-Properties-double-click Internet Protocol (TCP / IP), check the Use the following IP address in the pop-up internet protocol properties page, and manually fill in the IP. Of course, this IP address is not filled in randomly. First, you need to confirm the IP address of the router in the LAN. This can be obtained from the network administrator. Of course, if it is a router set by yourself, you can check it in the router manual. The IP address of the general home router is 192.168.0.1 or 192.168.1.1. Fill the router's IP address into the default gateway. The IP address can be filled in with the last digit of the router's IP address between 2 and 254. The subnet mask can be filled in with 255.255.255.0. The last thing to note is to fill in the DNS server to resolve the address. You can check the DNS server address of the local telecommunications company. ^[1]