What is the carburetor of the oje?

and the carburetor of the OJE is a device used to measure the amount of fuel and air that can enter the combustion chamber of the engine. The carburetor, which contains high speed controls, slow speed and choke, is similar to the carburetor used on a snow-flower or lawn. Unlike the car carburetor, the carburetor does not include the accelerator pump. By permitting the exact amount of fuel and air, the carburetor can cause the engine to turn very quickly, idle very slow or anywhere anywhere between them. The carburetor is one of the most important components of the engine and instructs the engine on how to control. Fuel and air must not simply pass through the carburetor; Rather, both are carefully measured by internal components in the carburetor and atomized into a fine fog. The fog is pulled into the engine vacuum, which is created by the piston.

after the piston sucksThe mixture of air and fuel into the combustion chamber, the piston reinforces the mixture and the spark plug lights the mixture and sends the piston back down. When the piston rises back through the cylinder, the exhaust is pushed from the engine through the exhaust valve and into the exhaust system. This is what is called the four cycle combustion process. Most cultures use a four -cylinder engine, but some use the engine of two cycles. These engines are used by specialized carburetors that are designed to function with oil of two cycles mixed in the fuel tank.

One of the most common problems with the carburetor of the OJE is the accumulation of paint in the carburetor. This occurs when the machine is allowed to sit for long periods with fuel in the gas tank and carburetor. The fuel is left to the coating of a similar coating on the Internetior of the fuel system components, as aged, requires cleaning before operating for a long non -operative period. About this problem can usually take care of the spraying of the aerosol carburetor cleaner in the carburetor of the oje and allows the cleaner to sit several minutesUT. It may be necessary to repeat this procedure several times, depending on the time when it was unsound.

Sometimes the carburetor will require removal to remove the varnish properly. This is achieved by removing the air filter and other small, mounting screws on the carburetor. Complete removal can sometimes be bred by spraying the cleaner in all ports and holes of the carburetor and allowing it to sit before assembling and inserting the gasoline back into the fuel tank.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?