What Is Sparging?

Liquid, gas, or granular solids are suddenly or violently released or released.

injection

(Ejector)

Right!

The flamethrower in the modern sense, its inventor is recognized as the German Richard. Federer, who produced a sample of flamethrower for German evaluation in 1901. Federer's device has basically all the features of a modern flamethrower. The device is human-powered and is equipped with a cylindrical container with a circumference of 1.2 meters. The container is horizontally divided into two parts and the lower part is compressed. Air bottle, the upper part is a burner bottle. When the shooter depresses the throttle handle on the fuel cylinder, the compressed air sprays the liquid combustion agent through a rubber tube from the steel launch nozzle. The launch nozzle has a simple ignition device. After the liquid combustion agent is ignited, , Forming a bunch of mushroom-shaped fireballs sprayed at the target. This equipment has a range of eighteen meters and is capable of continuous injection for two minutes, but the ignition beacon is a one-time use and must be replaced with a new one for each launch. Federer's installation was not adopted by the German military until ten years later, in 1911. The German army formed a special regiment with twelve companies equipped with the first flamethrower in modern history. But four years later, the flamethrower showed its appalling power on the battlefield.

Hydraulic ejector is a kind of mechanical device with three kinds of effective energy such as vacuum, condensation and drainage. It uses a certain pressure of water flow to be symmetrically and uniformly sprayed out of a nozzle with a certain inclination to converge on a focal point. Due to the high speed of the jet water flow, a negative pressure is created around the chamber to generate a vacuum. In addition, the secondary steam is in direct contact with the jet water flow for heat exchange, and most of the steam condenses into water. The condensed gas also rubs against the high-speed jet of water, mixes and squeezes it, and is eliminated through the expansion pipe, so that a higher vacuum is formed in the chamber. Hydro ejectors are widely used, mainly used in vacuum and evaporation systems for vacuum pumping, vacuum evaporation, vacuum filtration, vacuum crystallization, drying, deodorization and other processes. They are sugar making, pharmaceutical, chemical, food, salt making,

(MS basic term) Since it is a control injector, it is a common device in MS and space ships. Unlike the usual launch of artificial satellites into orbit, the gunners in the Gundam world are usually used as MS or ships as auxiliary devices when changing posture or balancing the fuselage.