What are the best tips for making olive oil?

olive oil is oil extracted from olives, fruit of the olive tree. It is usually imported and sold in stores, but it is possible to produce olive oil. With a little effort and fresh olives, you may find that the production of olive oil at home results in delicious delicacy. It can be used either green or black olives, but must be fresh and untreated. Olives can also be obtained directly from the tree by selecting or tremor. If there are no olive trees where you live, fresh olives can be purchased from the olive producer, the farmers' market or in a special supermarket. It is not necessary to remove the pits in the production of olive oil. Removal of pit actually reduces your final yield.

olives will then be crushed by sufficient force to form a paste. The traditional method of crushing mortar and thickness, although anything that is able to grind olives for wet paste will work. One useful tip is to crush olives as slow as possible. May seem tempting to use a kitchen robot but if olives are made in paste too rAlert, bitter flavors may be present in the oil.

After crushing, the olive paste should be slowly mixed for 20 to 40 minutes. This process is essential and critical for successful olive oil. The process of slow mixing is necessary, as it allows the microscopic droplets of the oil to join into larger ones that will then be extracted. If this step is omitted, your oil yield will be much smaller.

The paste should then be extended and pushed to push out the plant fluid, a mixture of oil and water. Leaving the liquid is the traditional method of separating oil and water. After completing a sufficiently long time and water, the water naturally separates. If you have patience, it can be a good method at home.

If the centrifugal is available in the production of olive oil, the separation process will be faster and more thorough. Centrifugal separation works so that a solution of vegetable solution quickly spins so thatThe part in the density between oil and water has caused the liquids to separate and collect or collect in different areas. Once the oil is separated from the water, it should be filtered again to remove all the particles that remain behind. This step can be skipped to create a cloud, more natural look.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?