What are the parts of the CAN production line?
cans are certainly one of the most common forms of packaging of products that are known to a person that is known. From non -alcoholic beverages to tennis balls and gunpowder come in cans. The production of cans is therefore one of the more fruitful global industries, producing billions of units around the world annually. The average CAN CAN production line is quite extensive and complex, consisting of a large number of phases, with each device aimed at making a series, but usually not all, types of cans. For this reason, it is difficult to describe the only, definitive process of making cans, but the basic arrangement of aluminum can be described in detail. Here is drawn raw aluminum material to form a continuous cylinder of the correct diameter for a particular can. The cylinder is then stretched into a combined trim machine and forming that cuts the cylinder to shorter semi -finished products. The same machine can also be configured to close the bottom of the can, createIL tops of screws and on the semi -finished product enjoyed its own patterns.
From the trimmer, the semi -finished products are transported by the conveyor to the washing part of the CAN production line. The markers are then washed several times with a powerful alkaline solution to remove all contaminants accumulated during extrusion and cut stages. From the washing plant, the cans are again transported by the conveyor to the annealing furnace, which heats the cans to a specific temperature to remove any hardening and fragility that has been forced by extrusion and trimming. Re -determination of cans in the annealing furnace is an essential part of the process if the finished cans are to remain flexible.
The annealing of the cans are transported to the accumulator that collects cans so that they can be fed in a controlled manner to the next two phases of production.The surface of cans and a paint cure furnace that adjusts the coating. From the pecings, the cans are transferred to the first color. This process includes printing a special band of automatic detection detection on a can that prevents the next steps from skipping. This includes two basic coat applications and four-, five or six-color printing that passes the desired design to the can.
Once the cans are colored, they are moved to the drying furnace to set the color. After the cans are cooled, they are sent to the last phase of the CAN production line, where they are limited by the readiness for distribution. In some cases, the CAN production line may include another step - can latexing - on request. In this step, the Latex ring is added to the base of the can as other measures to protect the content and the life extension.