What is the bell clip?

Bell Crank is a device that changes an angle at which a piece of suspension or connection is controlled. For example, the interconnection of the throttle can be connected to the bell handle, and when the binding is pulled directly backwards, the bell handle can pull the throttle sideways sideways. This is usually used for multiple carburetor settings and fuel injection. Another feature of the bell is its ability to increase or reduce the ratio of the component effect to suspensions. By attaching the spring to the bell handle, the amount of travel can therefore be the speed of the spring voltage-from the mounting position on the bell handle. The arms at an angle may vary in length; However, most of the arms are exactly the same length and create a perfect 90 -degree angle with different mounting positions on each arm. The mounting position changes the ratio of draft and can be produced to move the proximony much with only minimal movement corresponding to the components. Although sometimes used with cable connections, the unit is usually used with hard lines or activated lines andKtivovaných poles.

In the bell control system, the control arm pushes or pulls one end of the handles forward or backwards. In response, the connection from the other end of the bell handles is pushing to the right or to the left, causing the wheels to turn in a specific direction. This type of driving is most often found on the T Ford or on the Sprint or Midget racing vehicle. The driving leaves the driver's cockpit and controls a long steel rod that reaches the front axle. This rod is attached to one end of the bell arm, while the other end of the handles is connected from one front wheel hub to the other.

This type of driving management is also used on ships. The rush is controlled by the same man as driving a car. This manipulation of push-and-pull ratio helps the ship's operator with the ability to quickly turn the rudder with minimal access from the ship's wheel. By increasing the rudder movement ratio comparedThe boat wheel drive is able to make very rapid changes in direction, helping it avoid collisions and objects in the water.